"============================================================================= " vim:ft=vim:ts=4:sw=4:noet:fdm=marker:commentstring=\"\ %s:ff=unix " File: texrc.vim " Author: Srinath Avadhanula " Created: Mon Apr 01 11:00 AM 2002 PST " CVS: $Id: texrc 998 2006-03-20 09:52:12Z srinathava $ " " Description: This file contains resource configuration information for the " latex-suite package. " " NOTE: Do NOT be edit this file directly: " this file will be over-written each time you install a new copy " of latex-suite. " " You can do one of the following: " 1. Copy this file into $VIMFILES/ftplugin/tex/texrc " and edit the values in that file. " $VIMFILES is ~/.vim for UNIX systems and ~/vimfiles for " WINDOWS systems. " " 2. Just set values of each setting individually in your " $VIMFILES/ftplugin/tex.vim file. (See above for what " $VIMFILES is). You will need to use :let instead of :TexLet " in this case. " " NOTE: This file is best viewed with Vim-6.0+ with folding turned on. " CVS: $Id: texrc 998 2006-03-20 09:52:12Z srinathava $ "============================================================================= " ============================================================================== " SafeLet: checks for value before giving default value {{{ " Description: The function takes in a single argument and splits it into 2 " parts, the first being the first found. this is taken " as a variable name and the next part is assigned to it " depending on whether the variable already exists or not. " handles the case where the next part is quoted or not. " All these calls work: " TexLet g:varname = 1 " TexLet g:varname = '1' " TexLet g:varname = 'foo bar' " TexLet g:varname = "foo\nbar" " TexLet g:varname = foo bar function! SafeLet(arg) let name = matchstr(a:arg, '^\s*\zs\(\S\+\)\ze\s*=') let value = matchstr(a:arg, '=\s*\zs.*\ze') let value = substitute(value, '\s*$', '', '') if !exists(name) if value =~ "^'\\|^\"" exec "let ".name." = ".value else exe "let ".name." = value" endif endif endfunction com! -nargs=+ TexLet :call SafeLet() " }}} " ============================================================================== " ============================================================================== " General settings {{{ TexLet g:Tex_UsePython = 1 " the system command which pulls in a file. if &shell =~ 'sh' TexLet g:Tex_CatCmd = 'cat' TexLet g:Tex_RmCmd = 'rm' else TexLet g:Tex_CatCmd = 'type' TexLet g:Tex_RmCmd = 'del' endif " whether to turn on debugging TexLet g:Tex_Debug = 0 " If non empty, all the debugging information will be written to a file of " this name. TexLet g:Tex_DebugLog = '' " }}} " ============================================================================== " Rules: specifications of programs for compiling and viewing {{{ " " By default, when you compile a tex file using \ll, then you will be " generating a .dvi file. Change this line if you want to set another default. " NOTE: Make sure that a target for this format exists in the 'Compiler rules' " section below and is set up properly for your system. if has('macunix') TexLet g:Tex_DefaultTargetFormat = 'pdf' else TexLet g:Tex_DefaultTargetFormat = 'dvi' endif " A comma seperated list of formats which need multiple compilations to be " correctly compiled. TexLet g:Tex_MultipleCompileFormats = 'dvi' " Uncomment this line if you compile ps files via dvi files. " TexLet g:Tex_FormatDependency_ps = 'dvi,ps' " ------------------------------------------------------------------------------ " Compiler rules {{{ " This is the first thing you should customize. It is set up for most common " values, but if use some other compiler, then you will want to change this. " As CompileFlags value you'd perhaps like to use, e.g., '-src-specials', " but it is known that it can sometimes give different results in the output, " so use it with care. TexLet g:Tex_CompileRule_dvi = 'latex -interaction=nonstopmode $*' TexLet g:Tex_EscapeChars = '{}\' TexLet g:Tex_CompileRule_ps = 'dvips -Ppdf -o $*.ps $*.dvi' " ways to generate pdf files. there are soo many... " NOTE: pdflatex generates the same output as latex. therefore quickfix is " possible. TexLet g:Tex_CompileRule_pdf = 'pdflatex -interaction=nonstopmode $*' " TexLet g:Tex_CompileRule_pdf = 'ps2pdf $*.ps' " TexLet g:Tex_CompileRule_pdf = 'dvipdfm $*.dvi' " TexLet g:Tex_CompileRule_pdf = 'dvipdf $*.dvi' TexLet g:Tex_CompileRule_html = 'latex2html $*.tex' TexLet g:Tex_CompileRule_bib = g:Tex_BibtexFlavor . ' $*' " Set Tex_UseMakefile to 0 if you want to ignore the presence of a Makefile " when deciding how to compile TexLet g:Tex_UseMakefile = 1 " }}} " ------------------------------------------------------------------------------ " Viewer rules {{{ " these programs are for viewing other formats. " NOTE: latex-suite will automatically append file. to these functions " when calling them. The viewer therefore cannot accept arguments after " the filename. " NOTE: Windows users: " Set your $PATH variable to include the full path to these programs. if has('win32') TexLet g:Tex_ViewRule_ps = 'gsview32' TexLet g:Tex_ViewRule_pdf = 'AcroRd32' TexLet g:Tex_ViewRule_dvi = 'yap -1' elseif has('macunix') " Let the system pick. If you want, you can override the choice here. TexLet g:Tex_ViewRule_ps = '' TexLet g:Tex_ViewRule_pdf = '' " TexLet g:Tex_ViewRule_pdf = 'Acrobat\ Reader\ 5.1' TexLet g:Tex_ViewRule_dvi = '' else TexLet g:Tex_ViewRule_ps = 'ghostview' TexLet g:Tex_ViewRule_pdf = 'xpdf' TexLet g:Tex_ViewRule_dvi = 'xdvi' " the option below specifies an editor for the dvi viewer while starting " up the dvi viewer according to Dimitri Antoniou's tip on vim.sf.net (tip " #225) TexLet g:Tex_UseEditorSettingInDVIViewer = 0 endif " Tex_ViewRuleComplete_{format} " " If a variable like this is specified, then it takes precedence over the " variable with the same suffix defined above. i.e, Tex_ViewRuleComplete_dvi " takes precedence over Tex_ViewRule_dvi. " " If only Tex_ViewRule_{format} is specified, then latex-suite constructs the " actual system command which calls that program automatically. For example, " if you specify Tex_ViewRule_dvi = 'kdvi', then latex-suite will issue the " command " !kdvi --unique file.dvi & " " However, if your viewer program accepts the file to be viewed in a way which " doesn't fit with the way latex-suite constructs the system command, then " specify it using this variable. You can use the same format here which " 'makeprg' accepts. So $* can be used in place of the main file name. " " IMPORTANT: Make sure you make the process go into the background otherwise " vim will wait for the viewer to terminate before letting you edit " the file again. " " Example: " Suppose you have a latex->html converter which converts a file say foo.tex " to a file foo/index.html. Then you would use: " " let g:Tex_ViewRuleComplete_html = 'MozillaFirebird $*/index.html &' " " Doing something like this would not be possible using Tex_ViewRule_html TexLet g:Tex_ViewRuleComplete_dvi = '' " }}} " ------------------------------------------------------------------------------ " }}} " ============================================================================== " Compiler: latex-suite comes with a customizable compiler plugin. {{{ " :help latex-compiling for a detailed description of these options. " " this is the list of patterns which will be ignored from the compiler output. " This is a handy way of specifying which warnings/errors to ignore. This is a " list of patterns seperated by '¡' TexLet g:Tex_IgnoredWarnings = \'Underfull'."\n". \'Overfull'."\n". \'specifier changed to'."\n". \'You have requested'."\n". \'Missing number, treated as zero.'."\n". \'There were undefined references'."\n". \'Citation %.%# undefined' " the 'ignore level' of the 'efm'. A value of 4 says that the first 4 kinds of " warnings in the list above will be ignored. Use the command TCLevel to set a " level dynamically. TexLet g:Tex_IgnoreLevel = 7 " NOTE: The values of g:Tex_Flavor and g:Tex_CompilerFlags are provided as a " way to make compiler/tex.vim standalone. i.e independent of the rest " of latex-suite. These variables are NOT used if you have already " defined g:Tex_CompileRule_dvi above. " " specifies the current latex flavor. TexLet g:Tex_Flavor = 'latex' " specifies the BibTeX flavor and if necessary options. If you use $* in this " setting, it will be replaced by the *root* of the main file name, i.e, if " the main file is "thesis.tex", $* will be "thesis". TexLet g:Tex_BibtexFlavor = 'bibtex' " specifies the MakeIndedx flavor and if necessary options. $* will be " replaced by the *root* of the main file name. See above. TexLet g:Tex_MakeIndexFlavor = 'makeindex $*.idx' " By default the program described by g:Tex_Flavor above is called with the " flags '--src-specials --interaction=nonstopmode'. If your particular version " of latex does not accept these arguments, you will need to set this variable " to the appropriate value. " NOTE: leave commented for using the default flags. " TODO: Is it necessary (or even desirable) to use 2 variables to specify a " flavor and flags seperately? --SA " TexLet g:Tex_CompilerFlags = '' " If disabled (set to 0) LaTeX-Suite doesn't go immediately to warnings or " errors after compilation TexLet g:Tex_GotoError = 1 " If set to 1, then latex-suite shows the context of the error in a preview " window beneath the window showing the actual errors. TexLet g:Tex_ShowErrorContext = 1 " Remove temp files created during part compilations when vim exits. TexLet g:Tex_RemoveTempFiles = 1 " }}} " ============================================================================== " Project: how to deal with multi file projects via latex-suite {{{ " Use a valid vim expression here if you want to customize the way latex-suite " searches for a master file from within another file. TexLet g:Tex_MainFileExpression = '' " }}} " ============================================================================== " Macros: latex-suite comes with a large number of macros to speed up typing {{{ " latex. " " Place Holder Options: {{{ " (See |placeholders| for a description of what place-holders are). " " these options are actually used by imaps.vim, therefore the prefix is Imap_ " and not Tex_. See |placeholders| for a description of how to use " place-holders. You can either completely disable placeholders (not " recommended) and/or you can change the place holder characters. TexLet g:Imap_UsePlaceHolders = 1 TexLet g:Imap_PlaceHolderStart = '<+' TexLet g:Imap_PlaceHolderEnd = '+>' " This option when set to 1 makes in insert mode delete " non-descriptive (empty) placeholders and enters insert mode. " NOTE: This option _has_ to be set in the .vimrc. Setting this in a filetype " plugin file such as ftplugin/tex.vim will not have any affect. TexLet g:Imap_DeleteEmptyPlaceHolders = 0 " When set to 1, in visual mode, takes you to the next placeholder " without deleting the current placeholder. " NOTE: This option _has_ to be set in the .vimrc. Setting this in a filetype " plugin file such as ftplugin/tex.vim will not have any affect. TexLet g:Imap_StickyPlaceHolders = 1 " }}} " Menu Wizard Option: {{{ " If the following variable is set to 1, then when an enviroment is chosen " from the menu then for selected environments, latex-suite asks a series of " questions on the command line and inserts a template with the corresponding " fields already filled in. " Setting this to zero will insert a template with |placeholders| marking off " the places where fields need to be filled. TexLet g:Tex_UseMenuWizard = 0 " }}} " Visual Mode Mapping Correction: {{{ " With so many visual maps, its helpful to have a way of catching typing " errors made in visual mode. What this does is to prompt you to correct your " visual mode mapping if you start out with g:Tex_Leader and then type some " illegal keys. " It basically maps just the g:Tex_Leader character to a function TexLet g:Tex_CatchVisMapErrors = 1 " }}} " Diacritics: {{{ " whether or not you want to use diacritics " (diacritics speed up typing some languages. the way they are set up in " latex-suite is " =char> = \'{} " +char> = \v{} " +} = \"a " :o = \^o " Default: 0 TexLet g:Tex_Diacritics = 0 " }}} " Leader Options: {{{ " The mappings in latex-suite are by default prefixed with the back-tick " character. For example, `/ inserts \frac{<++>}{<++>}<++> etc. You can change the " prefix with the following setting. " ',', '/', '`' are preferred values. '' or '\' will lead to a _lot_ of " trouble. " g:Tex_Leader is also used for visual mode mappings for fonts. TexLet g:Tex_Leader = '`' " In order to avoid ambiguity between the large number of visual mode macros " provided, the visual mode macros for environments and sections start with a " character different from '`'. TexLet g:Tex_Leader2 = ',' " }}} " Environment Macros: {{{ " These mappings insert LaTeX "environments" such as " \begin{center} " <++> " \end{center}<++> " with the cursor left at the first place-holder. " (See |placeholders| for what these are.) " Mnemonic: " 1. All environment mappings begin with 'E' " 2. The next two capital letters are (for the common environments) the " first 2 letters of the environment name converted into upper case. For " example, for the center environment above, use ECE. There are a few " necessary exceptions such as: " equation --> EEQ " eqnarray --> EEA " Please see texmaps.vim for the complete list. " " Along with the insert mode mappings, a set of visual mode mappings is " provided which encloses the visually selected region in an environment. " These maps are related to the corresponding insert mode mappings by the " following rule: " EFI --> ,fi " and so on. i.e, the leading E becomes '`' and the next 2 letters are small " case. Some of the visual mode mappings are sensetive to whether you choose " line-wise or character wise. For example, if you choose a word and press " `ve, then you get \verb|word|, whereas if you press `ve on a line-wise " selection, you get: " \begin{verbatim} " line " \end{verbatim} " " these 2 options give finer control on which aspect of the macros you want " to enable. TexLet g:Tex_EnvironmentMaps = 1 TexLet g:Tex_EnvironmentMenus = 1 " }}} " Font Macros: {{{ " These mappings insert font descriptions such as: " \textsf{<++>}<++> " again with the cursor at the first place-holder. " Mnemonic: " 1. first letter is always F (F for font) " 2. next 2 letters are the 2 letters describing the font. " " Example: the above mapping is triggered by FSF. " " Just like environment mappings, you can visually select an area and press " `sf to have it enclosed in: " \textsf{word} " or " {\sffamily " line " } " depending on character-wise or line-wise selection. TexLet g:Tex_FontMaps = 1 TexLet g:Tex_FontMenus = 1 " }}} " Section Macros: {{{ " Inserts LaTeX sections: " \section " etc. Just as in the case of environments and fonts, can be enclosed with a " visual selection. The enclosing is not sensetive to character or line-wise " selection. " NOTE: In visual mode, you are supposed to select the name of the section " etc, not the whole section. " In the following case, select just the first line, not lines 1-3. " 1 section name " 2 some lines in this section " 3 and some more lines " Mnemonic: (make your own!) " SPA for part " SCH for chapter " SSE for section " SSS for subsection " SS2 for subsubsection " SPG for paragraph " SSP for subparagraph TexLet g:Tex_SectionMaps = 1 TexLet g:Tex_SectionMenus = 1 " }}} " Auctex Style Mappings: {{{ " Auctex.vim has heavily inspired various portions of latex-suite providing " various new ways of conviniently inserting environments. " " If you press in the insert mode while on an empty line, latex-suite " prompts you with a list of environments you might want to insert. You can " either choose one from the list or type in a new environment name. " The variable below (which is a comma seperated list of environment names) " decides the prompt which latex-suite generates. " You can place as many items as you want here. If the environment name is a " standard latex environment such as table or figure, then latex-suite will " insert a template with additional fields, if not, just a bare bones " \begin{env} " <++> " \end{env} " is inserted. " \[ and $$ are also recognized. " NOTE: Setting this variable to the empty string is a way of leaving the " key unmapped TexLet g:Tex_PromptedEnvironments = \ 'eqnarray*,eqnarray,equation,equation*,\[,$$,align,align*' " Another quick way of inserting environments is to press one of the shifted " function keys from through . " Each environment in the following list is mapped to a corresponding shifted " function key. " NOTE: Setting this variable to the empty string is a way of leaving all the " shifted function keys untouched by latex-suite. " NOTE: Only the first 4 items of the list are used. The rest will be silently " ignored. " The number of items in this list decides how many shifted function keys are " mapped. TexLet g:Tex_HotKeyMappings = \ 'eqnarray*,eqnarray,bmatrix' " Similar to above mechanisms works key. It prompts for command with list " of commands from g:Tex_PromptedCommands. There are not HotKeys for commands. " It works for commands of style \com{}. Changing of current command is done " with TexLet g:Tex_PromptedCommands = \ 'footnote,cite,pageref,label' " }}} " Smart Key Mappings: {{{ " Latex-suite shites with a number of 'smart' maps, where the behavior of " standard keys is modified in a way which makes editing tex files easy. " Pressing in insert mode checks to see whether we are just after " something like \'{a} and if so, deletes all of it. i.e, diacritics are " treated as single characters for backspacing. " Setting this to zero will leave the key unmapped. " Default: 1 TexLet g:Tex_SmartKeyBS = 1 " The pattern used to detect whether the previous characters comprise a " diacritic character. This default pattern detects the standard LaTeX " diacritics TexLet g:Tex_SmartBSPattern = \ '\(' . \ "\\\\[\"^'=v]{\\S}" . '\|' . \ "\\\\[\"^'=]\\S" . '\|' . \ '\\v \S' . '\|' . \ "\\\\[\"^'=v]{\\\\[iI]}" . '\|' . \ '\\v \\[iI]' . '\|' . \ '\\q \S' . '\|' . \ '\\-' . \ '\)' . "$" " Pressing " (english double quote) will insert `` or '' by making an " intelligent guess about whether we intended to open or close a quote. " Default: 1 TexLet g:Tex_SmartKeyQuote = 1 " Users of other languages might want to change the quote characters to suit " their locale. These global values will be ignored if there are buffer-local " versions, which may be set in the language-specific package files, such as " ftplugin/latex-suite/packages/german TexLet g:Tex_SmartQuoteOpen = "``" TexLet g:Tex_SmartQuoteClose = "''" " Latex-suite maps the key in such a way that $ characters are not " broken across lines. " NOTE: Setting this to 1 has the side-effect of making the 'tw' setting be 0. " Default: TexLet g:Tex_SmartKeySpace = 0 " Pressing ... (3 dots) results in \ldots outside math mode and \cdots in math " mode. " " TODO: Make it more intelligent within math mode. For example " $1+...+3$ should expand to $1+\cdots+n$, whereas $1,...,n$ should expand " to $1,\ldots,n$. The amsmath package actually provides a command \dots " which does this. Maybe use that if amsmath is detected? " Default: 1 TexLet g:Tex_SmartKeyDot = 1 " }}} " Advanced Math: {{{ " These mappings allow for fast inserting of math constructions " brackets, better handling of space in math mode, unfortunately " they use mappings which conflicts with some encodings. This is easy way " of turning them off. " " encloses the previous character in \mathbf{} " is polymorphic as follows: " Insert mode: " 1. If the previous character is a letter or number, then capitalize it and " enclose it in \mathcal{} " 2. otherwise insert \cite{} " Visual Mode: " 1. Enclose selection in \mathcal{} " is also polymorphic as follows: " If the character before typing is one of '([{| \left(\right " similarly for [, | " { \left\{\right\} " 2. < \langle\rangle " 3. q \lefteqn{} " otherwise insert \label{} " inserts \item commands at the current cursor location depending on " the surrounding environment. For example, inside itemize, it will " insert a simple \item, but within a description, it will insert " \item[<+label+>] etc. " " Default: 1 TexLet g:Tex_AdvancedMath = 1 " }}} " }}} " ============================================================================== " TeX Completion: {{{ " Options for controlling the window sizes of the completion windows {{{ " The height of the window which contains the \label's (when completing a " \ref) or bibtex entries (when completing a \cite). This option is used in " the newer methods of completing \ref's and \cite's. TexLet g:Tex_OutlineWindowHeight = 15 " Options for preview window for ref/cite completion. The next two options " are used only when g:Tex_UseOutlineCompletion = 0 or " g:Tex_UseCiteCompletionVer2 = 0, i.e, when we use a classic method of " completing \refs and \cites. " Height of cwindow TexLet g:Tex_ViewerCwindowHeight = 5 " Height of preview window TexLet g:Tex_ViewerPreviewHeight = 10 " Options for explorer completion. " Height of explorer window TexLet g:Tex_ExplorerHeight = 10 " Directory for images. Read |latex-completion-explorer| before changing TexLet g:Tex_ImageDir = '' " }}} " Options for completing a \ref {{{ " Whether to use the "outline mode" for displaying the \label's while doing " \ref completion. In this mode, each label is displayed within the " document element it resides in. The entire thing is folded to ease " navigation. Should be easier/faster than the classical mode. TexLet g:Tex_UseOutlineCompletion = 1 " This option should be set via the .latexmain file. It should be a newline " seperated list of files which make up all the "source" files in the " current project. This enables latex-suite to skip the more complicated " algorithm of finding the source files by recursively searching for " \input'ed files from the |latex-master-file|. " " Only used when g:Tex_UseOutlineCompletion = 0. TexLet g:Tex_ProjectSourceFiles = '' " Whether latex-suite simply searches for \\label's in all the .tex file " found in the current directory or whether it will use a more complex " algorithm. This is used only g:Tex_UseOutlineCompletion = 0 and " g:Tex_ProjectSourceFiles = ''. " See " :help Tex_UseSimpleLabelSearch " for more information TexLet g:Tex_UseSimpleLabelSearch = 0 " }}} " Options for completing a \cite'ation {{{ " If set to 1, then the newer way of presenting the bibtex entries is used. " Instead of a |cwindow| showing just the keys and a synced |preview| " window beneath, show a single window containing a nicely formatted list " of bibtex entries. This should be faster and easier to use than the " classic mode TexLet g:Tex_UseCiteCompletionVer2 = 1 " This is a string which is displayed to the user when he wants to sort or " filter the bibtex entries. This string also serves to define acronyms for " the various fields of a bibtex entry. TexLet g:Tex_BibFieldPrompt = \ "Field acronyms: (`:let g:Tex_EchoBibFields = 0` to avoid this message)\n" . \ " [t] title [a] author [b] booktitle \n" . \ " [j] journal [y] year [p] bibtype \n" . \ " (you can also enter the complete field name) \n" " Whether or not to display the string above to aid the user in choosing " the field to filter/sort with. TexLet g:Tex_EchoBibFields = 1 " A setting of this form defines the letter 'a' as standing for the field " 'author'. Thus when the user types " a ellington " when asked to enter a filter, it is equivalent to the user specifying the " filter " author ellington " TexLet g:Tex_BibAcronym_a = 'author' " Whether or not to use Jabref to complete citations " See " :help latex-suite-jabref " for more infomration TexLet g:Tex_UseJabref = 0 " whether or not searches for \cite's are cached. TexLet g:Tex_RememberCiteSearch = 0 " Paths to the bibliography files and custom packages. TexLet g:Tex_BIBINPUTS = '' TexLet g:Tex_TEXINPUTS = '' " }}} " }}} " ============================================================================== " Menus: set the kinds of menus which you would like to see. {{{ " " Setting this variable to zero will immediately disable _all_ menus. " for finer control set this to 1 and then play with the other options. " Default: 1 TexLet g:Tex_Menus = 1 " The location of the main menu TexLet g:Tex_MainMenuLocation = 80 " Math contains a large number of tex math elemets such as arrows, " mathematical fonts (\mathrm), mathematical diacritics (\dot), binary " relational operators etc. This menu compromises about 75% of the menus. " Default: 1 TexLet g:Tex_MathMenus = 1 " The following options control the "compactness" of the menus. " " Setting this option to 1 makes the Font, Counter and Dimensioning menus to " be collected together into a single 'Tex-Elements' menu. Setting this to 0 " creates seperate menus for each of them. " Default: 1 TexLet g:Tex_NestElementMenus = 1 " Sometimes when you are using a lot of packages with lots of options etc, " then a lot of time might be spent at startup loading the menus. " Setting the following variable to 0 will stop autoloading the packages menu. " You can still goto TeX-Suite.Configure Menu and load this after startup. " Default: 1 TexLet g:Tex_PackagesMenu = 1 " The following option will create the packages option within the TeX-Suite " menu. " Default: 1 TexLet g:Tex_NestPackagesMenu = 1 " This is the prefix added to the menu names created by latex suite. Add a " dot to the following option to nest the menus under the menu name before the " dot. " NOTE: With a '.' as the last character of the following setting, every " single menu created by latex suite will be nested under the same menu. " Default: 'TeX-' TexLet g:Tex_MenuPrefix = 'TeX-' " Use utf-8 menus. There is plenty of math symbols in LaTeX. It is hard to " remember them. You can display them with utf-8. Your system/GUI interface " have to support utf-8. This addition is necessary for resetting 'encoding'. TexLet g:Tex_UseUtfMenus = 0 if g:Tex_UseUtfMenus != 0 && has("gui_running") set encoding=utf-8 endif " }}} " ============================================================================== " Folding: latex-suite comes with 'fake' syntax folding. {{{ " " specifies whether the MakeTeXFolds() function will be defined. If this is " set to zero, then esentially you have disabled all of latex-suite's folding " functions. no maps for refreshing folds will be set up etc. " NOTE: However, the function TexFoldTextFunction() is still avaiable " and 'foldexpr' is set to point to it. This is so you can continue " using another folding scheme but still use the fold text function. TexLet g:Tex_Folding = 1 " specifies whether a latex file is automatically folded up when opened. " Setting this to zero means that a file is not folded up as soon as its " opened. " NOTE: the MakeTeXFolds() function will still be available (unless disabled " by g:Tex_Folding), so you can do or \rf to refresh/create folds. TexLet g:Tex_AutoFolding = 1 " }}} " ============================================================================== " Taglist: Support for taglist.vim {{{ " " LaTeX-Suite offers now support for taglist.vim, the most popular Vim " interface for ctags. You should use ctags version >= 5.0 and taglist >= 3.0. TexLet g:Tex_TaglistSupport = 1 " This option turns on definition of tags for LaTeX. " NOTE: In taglist window you may see duplicate entries for the same tag. It " means some definitions are repeated somewhere else. You can turn off " internal definitions or remove external (read ctags description " where). TexLet g:Tex_InternalTagsDefinitions = 1 " }}} " ==============================================================================