diff options
Diffstat (limited to 'dot_vim/ftplugin/latex-suite/texrc')
| -rw-r--r-- | dot_vim/ftplugin/latex-suite/texrc | 738 |
1 files changed, 738 insertions, 0 deletions
diff --git a/dot_vim/ftplugin/latex-suite/texrc b/dot_vim/ftplugin/latex-suite/texrc new file mode 100644 index 0000000..79068a8 --- /dev/null +++ b/dot_vim/ftplugin/latex-suite/texrc @@ -0,0 +1,738 @@ +"============================================================================= +" vim:ft=vim:ts=4:sw=4:noet:fdm=marker:commentstring=\"\ %s:ff=unix +" File: texrc.vim +" Author: Srinath Avadhanula +" Created: Mon Apr 01 11:00 AM 2002 PST +" CVS: $Id: texrc 998 2006-03-20 09:52:12Z srinathava $ +" +" Description: This file contains resource configuration information for the +" latex-suite package. +" +" NOTE: Do NOT be edit this file directly: +" this file will be over-written each time you install a new copy +" of latex-suite. +" +" You can do one of the following: +" 1. Copy this file into $VIMFILES/ftplugin/tex/texrc +" and edit the values in that file. +" $VIMFILES is ~/.vim for UNIX systems and ~/vimfiles for +" WINDOWS systems. +" +" 2. Just set values of each setting individually in your +" $VIMFILES/ftplugin/tex.vim file. (See above for what +" $VIMFILES is). You will need to use :let instead of :TexLet +" in this case. +" +" NOTE: This file is best viewed with Vim-6.0+ with folding turned on. +" CVS: $Id: texrc 998 2006-03-20 09:52:12Z srinathava $ +"============================================================================= + +" ============================================================================== +" SafeLet: checks for value before giving default value {{{ +" Description: The function takes in a single argument and splits it into 2 +" parts, the first being the first <CWORD> found. this is taken +" as a variable name and the next part is assigned to it +" depending on whether the variable already exists or not. +" handles the case where the next part is quoted or not. +" All these calls work: +" TexLet g:varname = 1 +" TexLet g:varname = '1' +" TexLet g:varname = 'foo bar' +" TexLet g:varname = "foo\nbar" +" TexLet g:varname = foo bar +function! <SID>SafeLet(arg) + let name = matchstr(a:arg, '^\s*\zs\(\S\+\)\ze\s*=') + let value = matchstr(a:arg, '=\s*\zs.*\ze') + let value = substitute(value, '\s*$', '', '') + if !exists(name) + if value =~ "^'\\|^\"" + exec "let ".name." = ".value + else + exe "let ".name." = value" + endif + endif +endfunction +com! -nargs=+ TexLet :call <SID>SafeLet(<q-args>) +" }}} +" ============================================================================== + +" ============================================================================== +" General settings {{{ + +TexLet g:Tex_UsePython = 1 + +" the system command which pulls in a file. +if &shell =~ 'sh' + TexLet g:Tex_CatCmd = 'cat' + TexLet g:Tex_RmCmd = 'rm' +else + TexLet g:Tex_CatCmd = 'type' + TexLet g:Tex_RmCmd = 'del' +endif + +" whether to turn on debugging +TexLet g:Tex_Debug = 0 +" If non empty, all the debugging information will be written to a file of +" this name. +TexLet g:Tex_DebugLog = '' + +" }}} +" ============================================================================== +" Rules: specifications of programs for compiling and viewing {{{ +" + +" By default, when you compile a tex file using \ll, then you will be +" generating a .dvi file. Change this line if you want to set another default. +" NOTE: Make sure that a target for this format exists in the 'Compiler rules' +" section below and is set up properly for your system. +if has('macunix') + TexLet g:Tex_DefaultTargetFormat = 'pdf' +else + TexLet g:Tex_DefaultTargetFormat = 'dvi' +endif + +" A comma seperated list of formats which need multiple compilations to be +" correctly compiled. +TexLet g:Tex_MultipleCompileFormats = 'dvi' + +" Uncomment this line if you compile ps files via dvi files. +" TexLet g:Tex_FormatDependency_ps = 'dvi,ps' + +" ------------------------------------------------------------------------------ +" Compiler rules {{{ +" This is the first thing you should customize. It is set up for most common +" values, but if use some other compiler, then you will want to change this. +" As CompileFlags value you'd perhaps like to use, e.g., '-src-specials', +" but it is known that it can sometimes give different results in the output, +" so use it with care. +TexLet g:Tex_CompileRule_dvi = 'latex -interaction=nonstopmode $*' +TexLet g:Tex_EscapeChars = '{}\' + +TexLet g:Tex_CompileRule_ps = 'dvips -Ppdf -o $*.ps $*.dvi' + +" ways to generate pdf files. there are soo many... +" NOTE: pdflatex generates the same output as latex. therefore quickfix is +" possible. +TexLet g:Tex_CompileRule_pdf = 'pdflatex -interaction=nonstopmode $*' + +" TexLet g:Tex_CompileRule_pdf = 'ps2pdf $*.ps' +" TexLet g:Tex_CompileRule_pdf = 'dvipdfm $*.dvi' +" TexLet g:Tex_CompileRule_pdf = 'dvipdf $*.dvi' + +TexLet g:Tex_CompileRule_html = 'latex2html $*.tex' + +TexLet g:Tex_CompileRule_bib = g:Tex_BibtexFlavor . ' $*' + +" Set Tex_UseMakefile to 0 if you want to ignore the presence of a Makefile +" when deciding how to compile +TexLet g:Tex_UseMakefile = 1 + +" }}} +" ------------------------------------------------------------------------------ +" Viewer rules {{{ +" these programs are for viewing other formats. +" NOTE: latex-suite will automatically append file.<format> to these functions +" when calling them. The viewer therefore cannot accept arguments after +" the filename. +" NOTE: Windows users: +" Set your $PATH variable to include the full path to these programs. +if has('win32') + TexLet g:Tex_ViewRule_ps = 'gsview32' + TexLet g:Tex_ViewRule_pdf = 'AcroRd32' + TexLet g:Tex_ViewRule_dvi = 'yap -1' +elseif has('macunix') + " Let the system pick. If you want, you can override the choice here. + TexLet g:Tex_ViewRule_ps = '' + TexLet g:Tex_ViewRule_pdf = '' + " TexLet g:Tex_ViewRule_pdf = 'Acrobat\ Reader\ 5.1' + TexLet g:Tex_ViewRule_dvi = '' +else + TexLet g:Tex_ViewRule_ps = 'ghostview' + TexLet g:Tex_ViewRule_pdf = 'xpdf' + TexLet g:Tex_ViewRule_dvi = 'xdvi' + " the option below specifies an editor for the dvi viewer while starting + " up the dvi viewer according to Dimitri Antoniou's tip on vim.sf.net (tip + " #225) + TexLet g:Tex_UseEditorSettingInDVIViewer = 0 +endif + +" Tex_ViewRuleComplete_{format} +" +" If a variable like this is specified, then it takes precedence over the +" variable with the same suffix defined above. i.e, Tex_ViewRuleComplete_dvi +" takes precedence over Tex_ViewRule_dvi. +" +" If only Tex_ViewRule_{format} is specified, then latex-suite constructs the +" actual system command which calls that program automatically. For example, +" if you specify Tex_ViewRule_dvi = 'kdvi', then latex-suite will issue the +" command +" !kdvi --unique file.dvi & +" +" However, if your viewer program accepts the file to be viewed in a way which +" doesn't fit with the way latex-suite constructs the system command, then +" specify it using this variable. You can use the same format here which +" 'makeprg' accepts. So $* can be used in place of the main file name. +" +" IMPORTANT: Make sure you make the process go into the background otherwise +" vim will wait for the viewer to terminate before letting you edit +" the file again. +" +" Example: +" Suppose you have a latex->html converter which converts a file say foo.tex +" to a file foo/index.html. Then you would use: +" +" let g:Tex_ViewRuleComplete_html = 'MozillaFirebird $*/index.html &' +" +" Doing something like this would not be possible using Tex_ViewRule_html +TexLet g:Tex_ViewRuleComplete_dvi = '' + +" }}} +" ------------------------------------------------------------------------------ +" }}} +" ============================================================================== +" Compiler: latex-suite comes with a customizable compiler plugin. {{{ +" :help latex-compiling for a detailed description of these options. +" +" this is the list of patterns which will be ignored from the compiler output. +" This is a handy way of specifying which warnings/errors to ignore. This is a +" list of patterns seperated by '¡' +TexLet g:Tex_IgnoredWarnings = + \'Underfull'."\n". + \'Overfull'."\n". + \'specifier changed to'."\n". + \'You have requested'."\n". + \'Missing number, treated as zero.'."\n". + \'There were undefined references'."\n". + \'Citation %.%# undefined' + +" the 'ignore level' of the 'efm'. A value of 4 says that the first 4 kinds of +" warnings in the list above will be ignored. Use the command TCLevel to set a +" level dynamically. +TexLet g:Tex_IgnoreLevel = 7 + +" NOTE: The values of g:Tex_Flavor and g:Tex_CompilerFlags are provided as a +" way to make compiler/tex.vim standalone. i.e independent of the rest +" of latex-suite. These variables are NOT used if you have already +" defined g:Tex_CompileRule_dvi above. +" +" specifies the current latex flavor. +TexLet g:Tex_Flavor = 'latex' + +" specifies the BibTeX flavor and if necessary options. If you use $* in this +" setting, it will be replaced by the *root* of the main file name, i.e, if +" the main file is "thesis.tex", $* will be "thesis". +TexLet g:Tex_BibtexFlavor = 'bibtex' + +" specifies the MakeIndedx flavor and if necessary options. $* will be +" replaced by the *root* of the main file name. See above. +TexLet g:Tex_MakeIndexFlavor = 'makeindex $*.idx' + +" By default the program described by g:Tex_Flavor above is called with the +" flags '--src-specials --interaction=nonstopmode'. If your particular version +" of latex does not accept these arguments, you will need to set this variable +" to the appropriate value. +" NOTE: leave commented for using the default flags. +" TODO: Is it necessary (or even desirable) to use 2 variables to specify a +" flavor and flags seperately? --SA +" TexLet g:Tex_CompilerFlags = '' + +" If disabled (set to 0) LaTeX-Suite doesn't go immediately to warnings or +" errors after compilation +TexLet g:Tex_GotoError = 1 + +" If set to 1, then latex-suite shows the context of the error in a preview +" window beneath the window showing the actual errors. +TexLet g:Tex_ShowErrorContext = 1 + +" Remove temp files created during part compilations when vim exits. +TexLet g:Tex_RemoveTempFiles = 1 + +" }}} +" ============================================================================== +" Project: how to deal with multi file projects via latex-suite {{{ + +" Use a valid vim expression here if you want to customize the way latex-suite +" searches for a master file from within another file. +TexLet g:Tex_MainFileExpression = '' + +" }}} +" ============================================================================== +" Macros: latex-suite comes with a large number of macros to speed up typing {{{ +" latex. +" +" Place Holder Options: {{{ +" (See |placeholders| for a description of what place-holders are). +" +" these options are actually used by imaps.vim, therefore the prefix is Imap_ +" and not Tex_. See |placeholders| for a description of how to use +" place-holders. You can either completely disable placeholders (not +" recommended) and/or you can change the place holder characters. + +TexLet g:Imap_UsePlaceHolders = 1 +TexLet g:Imap_PlaceHolderStart = '<+' +TexLet g:Imap_PlaceHolderEnd = '+>' + +" This option when set to 1 makes <C-J> in insert mode delete +" non-descriptive (empty) placeholders and enters insert mode. +" NOTE: This option _has_ to be set in the .vimrc. Setting this in a filetype +" plugin file such as ftplugin/tex.vim will not have any affect. +TexLet g:Imap_DeleteEmptyPlaceHolders = 0 + +" When set to 1, in visual mode, <C-J> takes you to the next placeholder +" without deleting the current placeholder. +" NOTE: This option _has_ to be set in the .vimrc. Setting this in a filetype +" plugin file such as ftplugin/tex.vim will not have any affect. +TexLet g:Imap_StickyPlaceHolders = 1 + + +" }}} +" Menu Wizard Option: {{{ +" If the following variable is set to 1, then when an enviroment is chosen +" from the menu then for selected environments, latex-suite asks a series of +" questions on the command line and inserts a template with the corresponding +" fields already filled in. +" Setting this to zero will insert a template with |placeholders| marking off +" the places where fields need to be filled. +TexLet g:Tex_UseMenuWizard = 0 + +" }}} +" Visual Mode Mapping Correction: {{{ +" With so many visual maps, its helpful to have a way of catching typing +" errors made in visual mode. What this does is to prompt you to correct your +" visual mode mapping if you start out with g:Tex_Leader and then type some +" illegal keys. +" It basically maps just the g:Tex_Leader character to a function +TexLet g:Tex_CatchVisMapErrors = 1 + +" }}} +" Diacritics: {{{ +" whether or not you want to use diacritics +" (diacritics speed up typing some languages. the way they are set up in +" latex-suite is +" =char> = \'{<char>} +" +char> = \v{<char>} +" +} = \"a +" :o = \^o +" Default: 0 +TexLet g:Tex_Diacritics = 0 + +" }}} +" Leader Options: {{{ +" The mappings in latex-suite are by default prefixed with the back-tick +" character. For example, `/ inserts \frac{<++>}{<++>}<++> etc. You can change the +" prefix with the following setting. +" ',', '/', '`' are preferred values. '' or '\' will lead to a _lot_ of +" trouble. +" g:Tex_Leader is also used for visual mode mappings for fonts. +TexLet g:Tex_Leader = '`' + +" In order to avoid ambiguity between the large number of visual mode macros +" provided, the visual mode macros for environments and sections start with a +" character different from '`'. +TexLet g:Tex_Leader2 = ',' + +" }}} +" Environment Macros: {{{ +" These mappings insert LaTeX "environments" such as +" \begin{center} +" <++> +" \end{center}<++> +" with the cursor left at the first place-holder. +" (See |placeholders| for what these are.) +" Mnemonic: +" 1. All environment mappings begin with 'E' +" 2. The next two capital letters are (for the common environments) the +" first 2 letters of the environment name converted into upper case. For +" example, for the center environment above, use ECE. There are a few +" necessary exceptions such as: +" equation --> EEQ +" eqnarray --> EEA +" Please see texmaps.vim for the complete list. +" +" Along with the insert mode mappings, a set of visual mode mappings is +" provided which encloses the visually selected region in an environment. +" These maps are related to the corresponding insert mode mappings by the +" following rule: +" EFI --> ,fi +" and so on. i.e, the leading E becomes '`' and the next 2 letters are small +" case. Some of the visual mode mappings are sensetive to whether you choose +" line-wise or character wise. For example, if you choose a word and press +" `ve, then you get \verb|word|, whereas if you press `ve on a line-wise +" selection, you get: +" \begin{verbatim} +" line +" \end{verbatim} +" +" these 2 options give finer control on which aspect of the macros you want +" to enable. +TexLet g:Tex_EnvironmentMaps = 1 +TexLet g:Tex_EnvironmentMenus = 1 + + +" }}} +" Font Macros: {{{ +" These mappings insert font descriptions such as: +" \textsf{<++>}<++> +" again with the cursor at the first place-holder. +" Mnemonic: +" 1. first letter is always F (F for font) +" 2. next 2 letters are the 2 letters describing the font. +" +" Example: the above mapping is triggered by FSF. +" +" Just like environment mappings, you can visually select an area and press +" `sf to have it enclosed in: +" \textsf{word} +" or +" {\sffamily +" line +" } +" depending on character-wise or line-wise selection. +TexLet g:Tex_FontMaps = 1 +TexLet g:Tex_FontMenus = 1 + +" }}} +" Section Macros: {{{ +" Inserts LaTeX sections: +" \section +" etc. Just as in the case of environments and fonts, can be enclosed with a +" visual selection. The enclosing is not sensetive to character or line-wise +" selection. +" NOTE: In visual mode, you are supposed to select the name of the section +" etc, not the whole section. +" In the following case, select just the first line, not lines 1-3. +" 1 section name +" 2 some lines in this section +" 3 and some more lines +" Mnemonic: (make your own!) +" SPA for part +" SCH for chapter +" SSE for section +" SSS for subsection +" SS2 for subsubsection +" SPG for paragraph +" SSP for subparagraph +TexLet g:Tex_SectionMaps = 1 +TexLet g:Tex_SectionMenus = 1 + +" }}} +" Auctex Style Mappings: {{{ +" Auctex.vim has heavily inspired various portions of latex-suite providing +" various new ways of conviniently inserting environments. +" +" If you press <F5> in the insert mode while on an empty line, latex-suite +" prompts you with a list of environments you might want to insert. You can +" either choose one from the list or type in a new environment name. +" The variable below (which is a comma seperated list of environment names) +" decides the prompt which latex-suite generates. +" You can place as many items as you want here. If the environment name is a +" standard latex environment such as table or figure, then latex-suite will +" insert a template with additional fields, if not, just a bare bones +" \begin{env} +" <++> +" \end{env} +" is inserted. +" \[ and $$ are also recognized. +" NOTE: Setting this variable to the empty string is a way of leaving the +" <F5> key unmapped + +TexLet g:Tex_PromptedEnvironments = + \ 'eqnarray*,eqnarray,equation,equation*,\[,$$,align,align*' + +" Another quick way of inserting environments is to press one of the shifted +" function keys from <F1> through <F4>. +" Each environment in the following list is mapped to a corresponding shifted +" function key. +" NOTE: Setting this variable to the empty string is a way of leaving all the +" shifted function keys untouched by latex-suite. +" NOTE: Only the first 4 items of the list are used. The rest will be silently +" ignored. +" The number of items in this list decides how many shifted function keys are +" mapped. +TexLet g:Tex_HotKeyMappings = + \ 'eqnarray*,eqnarray,bmatrix' + +" Similar to above mechanisms works <F7> key. It prompts for command with list +" of commands from g:Tex_PromptedCommands. There are not HotKeys for commands. +" It works for commands of style \com{}. Changing of current command is done +" with <S-F7> + +TexLet g:Tex_PromptedCommands = + \ 'footnote,cite,pageref,label' + +" }}} +" Smart Key Mappings: {{{ +" Latex-suite shites with a number of 'smart' maps, where the behavior of +" standard keys is modified in a way which makes editing tex files easy. + +" Pressing <BS> in insert mode checks to see whether we are just after +" something like \'{a} and if so, deletes all of it. i.e, diacritics are +" treated as single characters for backspacing. +" Setting this to zero will leave the <BS> key unmapped. +" Default: 1 +TexLet g:Tex_SmartKeyBS = 1 +" The pattern used to detect whether the previous characters comprise a +" diacritic character. This default pattern detects the standard LaTeX +" diacritics +TexLet g:Tex_SmartBSPattern = + \ '\(' . + \ "\\\\[\"^'=v]{\\S}" . '\|' . + \ "\\\\[\"^'=]\\S" . '\|' . + \ '\\v \S' . '\|' . + \ "\\\\[\"^'=v]{\\\\[iI]}" . '\|' . + \ '\\v \\[iI]' . '\|' . + \ '\\q \S' . '\|' . + \ '\\-' . + \ '\)' . "$" + +" Pressing " (english double quote) will insert `` or '' by making an +" intelligent guess about whether we intended to open or close a quote. +" Default: 1 +TexLet g:Tex_SmartKeyQuote = 1 + +" Users of other languages might want to change the quote characters to suit +" their locale. These global values will be ignored if there are buffer-local +" versions, which may be set in the language-specific package files, such as +" ftplugin/latex-suite/packages/german +TexLet g:Tex_SmartQuoteOpen = "``" +TexLet g:Tex_SmartQuoteClose = "''" + +" Latex-suite maps the <space> key in such a way that $ characters are not +" broken across lines. +" NOTE: Setting this to 1 has the side-effect of making the 'tw' setting be 0. +" Default: +TexLet g:Tex_SmartKeySpace = 0 + +" Pressing ... (3 dots) results in \ldots outside math mode and \cdots in math +" mode. +" +" TODO: Make it more intelligent within math mode. For example +" $1+...+3$ should expand to $1+\cdots+n$, whereas $1,...,n$ should expand +" to $1,\ldots,n$. The amsmath package actually provides a command \dots +" which does this. Maybe use that if amsmath is detected? +" Default: 1 +TexLet g:Tex_SmartKeyDot = 1 + +" }}} +" Advanced Math: {{{ +" These mappings allow for fast inserting of math constructions +" brackets, better handling of space in math mode, unfortunately +" they use <M-> mappings which conflicts with some encodings. This is easy way +" of turning them off. +" +" <M-b> encloses the previous character in \mathbf{} +" <M-c> is polymorphic as follows: +" Insert mode: +" 1. If the previous character is a letter or number, then capitalize it and +" enclose it in \mathcal{} +" 2. otherwise insert \cite{} +" Visual Mode: +" 1. Enclose selection in \mathcal{} +" <M-l> is also polymorphic as follows: +" If the character before typing <M-l> is one of '([{|<q', then do the +" following: +" 1. (<M-l> \left(\right +" similarly for [, | +" {<M-l> \left\{\right\} +" 2. <<M-l> \langle\rangle +" 3. q<M-l> \lefteqn{} +" otherwise insert \label{} +" <M-i> inserts \item commands at the current cursor location depending on +" the surrounding environment. For example, inside itemize, it will +" insert a simple \item, but within a description, it will insert +" \item[<+label+>] etc. +" +" Default: 1 +TexLet g:Tex_AdvancedMath = 1 + +" }}} + +" }}} +" ============================================================================== +" TeX Completion: {{{ + +" Options for controlling the window sizes of the completion windows {{{ + +" The height of the window which contains the \label's (when completing a +" \ref) or bibtex entries (when completing a \cite). This option is used in +" the newer methods of completing \ref's and \cite's. +TexLet g:Tex_OutlineWindowHeight = 15 + +" Options for preview window for ref/cite completion. The next two options +" are used only when g:Tex_UseOutlineCompletion = 0 or +" g:Tex_UseCiteCompletionVer2 = 0, i.e, when we use a classic method of +" completing \refs and \cites. +" Height of cwindow +TexLet g:Tex_ViewerCwindowHeight = 5 +" Height of preview window +TexLet g:Tex_ViewerPreviewHeight = 10 + +" Options for explorer completion. +" Height of explorer window +TexLet g:Tex_ExplorerHeight = 10 + +" Directory for images. Read |latex-completion-explorer| before changing +TexLet g:Tex_ImageDir = '' + +" }}} +" Options for completing a \ref {{{ + +" Whether to use the "outline mode" for displaying the \label's while doing +" \ref completion. In this mode, each label is displayed within the +" document element it resides in. The entire thing is folded to ease +" navigation. Should be easier/faster than the classical mode. +TexLet g:Tex_UseOutlineCompletion = 1 + +" This option should be set via the .latexmain file. It should be a newline +" seperated list of files which make up all the "source" files in the +" current project. This enables latex-suite to skip the more complicated +" algorithm of finding the source files by recursively searching for +" \input'ed files from the |latex-master-file|. +" +" Only used when g:Tex_UseOutlineCompletion = 0. +TexLet g:Tex_ProjectSourceFiles = '' + +" Whether latex-suite simply searches for \\label's in all the .tex file +" found in the current directory or whether it will use a more complex +" algorithm. This is used only g:Tex_UseOutlineCompletion = 0 and +" g:Tex_ProjectSourceFiles = ''. +" See +" :help Tex_UseSimpleLabelSearch +" for more information +TexLet g:Tex_UseSimpleLabelSearch = 0 + +" }}} +" Options for completing a \cite'ation {{{ + +" If set to 1, then the newer way of presenting the bibtex entries is used. +" Instead of a |cwindow| showing just the keys and a synced |preview| +" window beneath, show a single window containing a nicely formatted list +" of bibtex entries. This should be faster and easier to use than the +" classic mode +TexLet g:Tex_UseCiteCompletionVer2 = 1 + +" This is a string which is displayed to the user when he wants to sort or +" filter the bibtex entries. This string also serves to define acronyms for +" the various fields of a bibtex entry. +TexLet g:Tex_BibFieldPrompt = + \ "Field acronyms: (`:let g:Tex_EchoBibFields = 0` to avoid this message)\n" . + \ " [t] title [a] author [b] booktitle \n" . + \ " [j] journal [y] year [p] bibtype \n" . + \ " (you can also enter the complete field name) \n" + +" Whether or not to display the string above to aid the user in choosing +" the field to filter/sort with. +TexLet g:Tex_EchoBibFields = 1 + +" A setting of this form defines the letter 'a' as standing for the field +" 'author'. Thus when the user types +" a ellington +" when asked to enter a filter, it is equivalent to the user specifying the +" filter +" author ellington +" TexLet g:Tex_BibAcronym_a = 'author' + +" Whether or not to use Jabref to complete citations +" See +" :help latex-suite-jabref +" for more infomration +TexLet g:Tex_UseJabref = 0 + +" whether or not searches for \cite's are cached. +TexLet g:Tex_RememberCiteSearch = 0 +" Paths to the bibliography files and custom packages. +TexLet g:Tex_BIBINPUTS = '' +TexLet g:Tex_TEXINPUTS = '' + +" }}} + +" }}} +" ============================================================================== +" Menus: set the kinds of menus which you would like to see. {{{ +" +" Setting this variable to zero will immediately disable _all_ menus. +" for finer control set this to 1 and then play with the other options. +" Default: 1 +TexLet g:Tex_Menus = 1 + +" The location of the main menu +TexLet g:Tex_MainMenuLocation = 80 + +" Math contains a large number of tex math elemets such as arrows, +" mathematical fonts (\mathrm), mathematical diacritics (\dot), binary +" relational operators etc. This menu compromises about 75% of the menus. +" Default: 1 +TexLet g:Tex_MathMenus = 1 + +" The following options control the "compactness" of the menus. +" +" Setting this option to 1 makes the Font, Counter and Dimensioning menus to +" be collected together into a single 'Tex-Elements' menu. Setting this to 0 +" creates seperate menus for each of them. +" Default: 1 +TexLet g:Tex_NestElementMenus = 1 + +" Sometimes when you are using a lot of packages with lots of options etc, +" then a lot of time might be spent at startup loading the menus. +" Setting the following variable to 0 will stop autoloading the packages menu. +" You can still goto TeX-Suite.Configure Menu and load this after startup. +" Default: 1 +TexLet g:Tex_PackagesMenu = 1 +" The following option will create the packages option within the TeX-Suite +" menu. +" Default: 1 +TexLet g:Tex_NestPackagesMenu = 1 + +" This is the prefix added to the menu names created by latex suite. Add a +" dot to the following option to nest the menus under the menu name before the +" dot. +" NOTE: With a '.' as the last character of the following setting, every +" single menu created by latex suite will be nested under the same menu. +" Default: 'TeX-' +TexLet g:Tex_MenuPrefix = 'TeX-' + +" Use utf-8 menus. There is plenty of math symbols in LaTeX. It is hard to +" remember them. You can display them with utf-8. Your system/GUI interface +" have to support utf-8. This addition is necessary for resetting 'encoding'. +TexLet g:Tex_UseUtfMenus = 0 + +if g:Tex_UseUtfMenus != 0 && has("gui_running") + set encoding=utf-8 +endif + +" }}} +" ============================================================================== +" Folding: latex-suite comes with 'fake' syntax folding. {{{ +" +" specifies whether the MakeTeXFolds() function will be defined. If this is +" set to zero, then esentially you have disabled all of latex-suite's folding +" functions. no maps for refreshing folds will be set up etc. +" NOTE: However, the function TexFoldTextFunction() is still avaiable +" and 'foldexpr' is set to point to it. This is so you can continue +" using another folding scheme but still use the fold text function. +TexLet g:Tex_Folding = 1 + +" specifies whether a latex file is automatically folded up when opened. +" Setting this to zero means that a file is not folded up as soon as its +" opened. +" NOTE: the MakeTeXFolds() function will still be available (unless disabled +" by g:Tex_Folding), so you can do <F6> or \rf to refresh/create folds. +TexLet g:Tex_AutoFolding = 1 + +" }}} +" ============================================================================== +" Taglist: Support for taglist.vim {{{ +" +" LaTeX-Suite offers now support for taglist.vim, the most popular Vim +" interface for ctags. You should use ctags version >= 5.0 and taglist >= 3.0. +TexLet g:Tex_TaglistSupport = 1 + +" This option turns on definition of tags for LaTeX. +" NOTE: In taglist window you may see duplicate entries for the same tag. It +" means some definitions are repeated somewhere else. You can turn off +" internal definitions or remove external (read ctags description +" where). +TexLet g:Tex_InternalTagsDefinitions = 1 + +" }}} +" ============================================================================== |