many more renames

1 files changed, 0 insertions, 448 deletions

diff --git a/.vim/doc/latex-suite-quickstart.txt b/.vim/doc/latex-suite-quickstart.txt
deleted file mode 100644
index 8c18b72..0000000
--- a/.vim/doc/latex-suite-quickstart.txt
+++ /dev/null
@@ -1,448 +0,0 @@
-                   A (very) quick introduction to Latex-Suite
-                          *latex-suite-quickstart.txt*
-                 Srinath Avadhanula <srinath AT fastmail DOT fm>
-                                        
-
-
-                                    Abstract
-                                    ========
-Latex-Suite is a comprehensive set of scripts to aid in editing, compiling and
-viewing LaTeX documents. A thorough explanation of the full capabilities of
-Latex-Suite is described in the user manual. This guide on the other hand,
-provides a quick 30-45 minute running start to some of the more commonly used
-functionalities of Latex-Suite.
-
-                                                *latex-suite-quickstart.txt-toc*
-|lq_1| Using this tutorial
-|lq_2| Inserting a template
-|lq_3| Inserting a package
-|lq_4| Inserting an Environment
-|lq_5| A few keyboard shortcuts
-|lq_6| Folding in Latex-Suite
-|lq_7| Inserting a Reference
-|lq_8| Compiling a document
-    |lq_8_1| Debugging LaTeX source files
-|lq_9| Viewing DVI files
-    |lq_9_1| Performing forward searches
-    |lq_9_2| Performing inverse searches
-|lq_10| Conclusions
-
-================================================================================
-Viewing this file
-
-This file can be viewed with all the sections and subsections folded to ease
-navigation. By default, vim does not fold help documents. To create the folds,
-press za now. The folds are created via a foldexpr which can be seen in the
-last section of this file.
-
-See |usr_28.txt| for an introduction to folding and |fold-commands| for key
-sequences and commands to work with folds.
-
-================================================================================
-Using this tutorial                                             *lq_1* *lq_a_bc*
-                                                            *lsq-using-tutorial*
-
-
-
-This tutorial assumes that you have vim version 6.1+ installed on your machine.
-To check, open vim and type  >
-    :ver
-You will see the version in the first line of the output. Get the latest vim
-version from http://vim.sf.net |lq_u_1|.
-
-Assuming you have Vim 6.1+ already up and running, follow the instructions here
-|lq_u_2| to set up Latex-Suite. Remember to make sure your 'grepprg' setting of
-Vim works.
-
-Good, now you are all set to start the tutorial. Since this tutorial aims to
-explain the newbie-friendly version of Latex-Suite, it needs some GUI
-functionality. Therefore, at least for this tutorial, open the gui version of
-vim. (On MS windows, this is the default). Open up this help file in either the
-same gvim session in a split window or in a different session and follow the
-(friendly) instructions.
-
-================================================================================
-Inserting a template                                            *lq_2* *lq_a_bd*
-                                                        *lsq-inserting-template*
-
-
-
-Start up gvim and begin editing a new file.  >
-    e newfile.tex
-If the installation went well, you should see a new set of menus appear. Goto
-Tex-Suite > Templates. You will see a number of templates to choose from. For
-now, choose to insert a template for an article. You should get the following in
-the main vim window (after possibly a hit-enter prompt).  >
-    
-          1 %        File: sample.tex
-          2 %     Created: Sun Jun 22 04:00 PM 2003 P
-          3 % Last Change: Sun Jun 22 04:00 PM 2003 P
-          4 %
-          5 \documentclass[a4paper]{article}
-          6 \begin{document}
-          7 
-          8 \end{document}
-          9 
-         10 ~
-         11 ~
-         12 ~
-         13 ~
-    -- INSERT --                                     7,1           All
-    
-
-
-The cursor is left on line 7 (just after the \begin{document} line) from where
-you can start typing straight away. Trying to lessen movement is a recurring
-theme in Latex-Suite.
-
-================================================================================
-Inserting a package                                             *lq_3* *lq_a_be*
-                                                     *lsq-lsq-inserting-package*
-
-
-
-Assume that we are writing a mathematical paper and we want to use the popular
-amsmath package. We will use some functionality which Latex-Suite provides
-specifically for including LaTeX packages, providing options etc. Navigate to
-before the \begin{document} line (The portion of the document before the
-\begin{document} is called the _preamble_ in LaTeX). On an empty line in the
-preamble, type the single word amsmath and then press <F5> in normal mode. The
-line will change to  >
-    \usepackage[]{amsmath}<++>
-with the cursor positioned conviniently between the []'s. For now, do not worry
-about the trailing <++> at the end of this line. Assume we want to provide the
-sumlimits options to amsmath. You can either type in this option manually, or
-choose from a menu of package options which Latex-Suite automatically creates
-when you insert a package using <F5>. With the cursor still placed between the
-[], goto TeX-Suite > Packages > amsmath Options. Choose the sumlimits option.
-The package line should get converted to:  >
-    \usepackage[sumlimits,]{amsmath}<++>
-
-
-with the cursor before ]. Press <C-j> in insert mode. You will see the cursor
-jump to the end of the package line and the trailing <++> will dissapear. What
-just happened?! You had your first taste of _Placeholders_. Read more about them
-(later) here |lq_u_3|. In short, pressing <C-j> in insert mode takes you to the
-next <++> in the text.
-
-================================================================================
-Inserting an Environment                                        *lq_4* *lq_a_bf*
-                                                        *lsq-insert-environment*
-
-
-
-Now let us type in a simple formula in LaTeX. Move back to the body of the
-document (The portion of the document between \begin{document} and
-\end{document} is called the body). Type in a few simple sentences and then on
-an empty line, type the single word eqnarray. Escape to normal mode and press
-<F5>. (Remember: <F5> is very useful!) This time, the line will change to:  >
-    \begin{eqnarray}
-        \label{}<++>
-    \end{eqnarray}<++>
-<with the cursor between the {}. Enter a label. We will use eqn:euler. After
-typing in eqn:euler, press <C-j>. This will take you outside the curly-braces.
-Another time you used a Placeholder!
-
-================================================================================
-A few keyboard shortcuts                                        *lq_5* *lq_a_bg*
-                                                        *lsq-keyboard-shortcuts*
-
-
-
-Now to type in the famous Euler formula. Our aim is to type  >
-    e^{j\pi} + 1 &=& 0
-Instead of typing this blindly, let us use a few shortcuts to reduce movement.
-Start out by typing e^. Now instead of typing {, type another ^. You will see
-the e^^ change instantly to e^{}<++> with the cursor between {}'s. (The ^^
-changed to ^{}<++>.) Continue with the following sequence of letters: j`p. This
-will change instantly to j\pi. (The `p changed to \pi.) Having typed in all we
-need to type between the {}'s, press <C-j>. You will pop back out of the
-curly-braces. Continue typing the rest of the formula. You can use == as a
-shortcut for &=&. Latex-Suite provides a large number of such shortcuts which
-should making typing much more fun and fast if you get acquainted with them. A
-list is provided here |lq_u_4|. Definitely spend some time getting a feel for
-them. Most of them are pretty intuitive like `/ for \frac{}{}, `8 for \infty
-etc.
-
-In order to understand the next section better, it will be helpful to have one
-more \label. Lets use the handy <F5> key to insert another equation. This time
-something simple like the following will do:  >
-    \begin{eqnarray}
-      \label{eqn:simple}
-      1 + 1 = 2
-    \end{eqnarray}
-
-
-================================================================================
-Folding in Latex-Suite                            *lq_6* *lq_a_bh* *lsq-folding*
-
-
-
-Okay, we have typed enough. At this stage, hopefully, your file is looking
-something like this:  >
-    
-          1 %        File: sample.tex
-          2 %     Created: Sun Jun 22 04:00 PM 2003 P
-          3 % Last Change: Mon Dec 15 07:00 PM 2003 
-          4 %
-          5 \documentclass[a4paper]{article}
-          6 
-          7 \usepackage[sumlimits,]{amsmath}
-          8 
-          9 \begin{document}
-         10 \begin{eqnarray}
-         11 	\label{eqn:euler}
-         12 	e^{j\pi} + 1 &=& 0
-         13 \end{eqnarray}
-         14 This is the famous euler equation. I
-         15 will type another equation, just as
-         16 true:
-         17 \begin{eqnarray}
-         18 	\label{eqn:simple}
-         19 	1 + 1 &=& 2
-         20 \end{eqnarray}
-         21 This is my contribution to mathematics.
-         22 \end{document}
-    
-In normal mode, press \rf. This will fold up the entire file and you should see
-the file looking as below:  >
-    
-          1 %        File: sample.tex
-          2 %     Created: Sun Jun 22 04:00 PM 2003 P
-          3 % Last Change: Mon Dec 15 07:00 PM 2003 
-          4 %
-          5 +--  4 lines: Preamble:   \documentclass[a4paper]{article} -----
-          9 \begin{document}
-         10 +--  4 lines: eqnarray (eqn:euler) \label{eqn:euler} -----------
-         14 This is the famous euler equation. I
-         15 will type another equation, just as
-         16 true:
-         10 +--  4 lines: eqnarray (eqn:simple) \label{eqn:simple} ---------
-         21 This is my contribution to mathematics.
-         22 \end{document}
-    
-What has happened is that Latex-Suite folded away blocks of LaTeX code into
-folded regions. You can open and close folds by using the command za in normal
-mode.
-
-================================================================================
-Inserting a Reference                                           *lq_7* *lq_a_bi*
-                                                       *lsq-inserting-reference*
-
-
-
-A necessary part of LaTeX editing is referencing equations, figures,
-bibliographic entries etc. This is done with the \ref and the \cite commands.
-Latex-Suite provides an easy way to do this. Somewhere in the body of the
-document, type in the following sentence  >
-    This is a reference to (\ref{}).
-With the cursor between the {} press <F9> in insert mode. Your vim session will
-sprout two new windows and it should look like below:  >
-    
-          9 \begin{document}
-         10 +--  4 lines: eqnarray (eqn:euler) :  \label{eqn:euler}-----------------------
-         14 This is the famous euler equation. I
-         15 will type another equation, just as
-         16 true:
-         17 +--  4 lines: eqnarray (eqn:simple) :  \label{eqn:simple}---------------------
-         21 This is my contribution to mathematics.
-         22 This is a reference to (\ref{}&lt;++&gt;)&lt;++&gt;
-         23 \end{document}
-    ~
-    ~
-    ~
-    test.tex [+]                                                        22,29          Bot
-    test.tex|11| \label{eqn:euler}
-    test.tex|18| \label{eqn:simple}
-    ~
-    ~
-    ~
-    [Error List]                                                        1,1            All
-          7 \usepackage[sumlimits,]{amsmath}
-          8
-          9 \begin{document}
-         10 \begin{eqnarray}
-         11     \label{eqn:euler}
-         12     e^{j\pi} + 1 &=& 0
-         13 \end{eqnarray}
-         14 This is the famous euler equation. I
-         15 will type another equation, just as
-         16 true:
-    test.tex [Preview][+]                                               11,2-5         46%
-    
-
-
-The cursor will relocate to the middle window which shows all \labels found in
-all the .tex file in the current directory. You can scroll up and down in the
-middle window till you reach the reference you want to insert. Notice how when
-you scroll in the middle window, the bottom "Preview" window scrolls
-automatically to show you the location of the current selection. This helps you
-identify the reference with greater ease because often times, \labels are not
-descriptive enough or there might be too many of them. To insert the reference,
-just position the cursor on the relevant line in the middle window and press
-<enter>. The line which you were editing will change to:  >
-    This is a reference to (\ref{eqn:euler})
-<and the bottom windows close automatically.
-
-The <F9> key also works for inserting \cite commands to reference bibliographich
-entries, inserting file names for the \inputgraphics command and just plain
-searching for words. Click here |lq_u_5| for more information.
-
-================================================================================
-Compiling a document                                            *lq_8* *lq_a_bj*
-                                                                 *lsq-compiling*
-
-|lq_8_1| Debugging LaTeX source files
-
-
-Great! We have just created a small latex file. The next step is to make the
-latex compiler create a .dvi file from it. Compiling via latex-suite is simple.
-Goto normal mode and press \ll (replace \ with whatever mapleader setting you
-have). This will call the latex compiler. If all goes well, then the focus
-should return to the vim window.
-
-Nothing happend? Ouch! You might need to do some additional settings as
-described here. |lq_u_6|
-
-
---------------------------------------------------------------------------------
-Debugging LaTeX source files                                  *lq_8_1* *lq_a_bk*
-                                                                 *lsq-debugging*
-
-To illustrate the debugging procedure, let's create a few mistakes in the file.
-Insert the following ``mistakes'' in the file:  >
-    This is a $\mistake$.
-    And this is $\another$
-Now press \ll again. This time you will notice that after compilation finishes,
-the cursor automatically lands on $\mistake$. In addition, 2 new windows will
-appear as shown here:
-
-The middle window is an _Error List_ window showing you the errors which the
-latex compiler found. Th bottom window is a _Log Preview_ window, which shows
-you the context of the error made by displaying the relevant portion of the .log
-file created during the latex compilation procedure. Jump to the _Error List_
-window and try scrolling around in it using either the j, k keys or the arrow
-keys. You will notice that the _Log Preview_ window scrolls automatically to
-retain the context of the error you are currently located on. If you press
-<enter> on any line, you will see the cursor jump to the location of the error.
-Latex-Suite tries to guess the column location as best as it can so you can
-continue typing straight away.
-Having got a taste for compiling, proceed by deleting the erroneous lines and
-re-compiling.
-
-The Latex-Suite compiler is capable of much more including selectively filtering
-out common errors which you might want to ignore for the moment, compiling parts
-of a document, setting levels of verbosity in the compiler output etc. See here
-|lq_u_7| for more.
-
-================================================================================
-Viewing DVI files                                               *lq_9* *lq_a_bl*
-                                                               *lsq-viewing-dvi*
-
-|lq_9_1| Performing forward searches
-|lq_9_2| Performing inverse searches
-
-
-Now that you have compiled your first latex source, its time to view it. Again,
-this should be pretty simple. Press \lv in normal mode. Depending on your
-platform, a DVI viewer program should open up and display the dvi file generated
-in compilation step previously.
-
-Nothing happend? Ouch! You might need to do some additional settings as
-described here. |lq_u_8|
-
-
---------------------------------------------------------------------------------
-Performing forward searches                                   *lq_9_1* *lq_a_bm*
-                                                   *lsq-quick-forward-searching*
-
-If you are using a modern DVI viewer, then it is possible to do what is called
-forward and inverse searching. However, you will need to customize the standard
-Latex-Suite distribution in order to utilize this functionality. Type in the
-following on the command line:  >
-    :let g:Tex_CompileRule_dvi = 'latex -src-specials -interaction=nonstopmode $*'
-    :TCTarget dvi
-
-
-Now recompile the latex file by pressing \ll. This time, instead of pressing \lv
-to view the file, press \ls from within the tex file. If the DVI viewer supports
-forward searching (most of them do), then the viewer will actually display the
-portion of the DVI file corresponding to the location where you were editing the
-tex file.
-
-NOTE: The reason Latex-Suite does not have this setting by default is that on
-      some systems this causes unpredictable results in the DVI output. If you
-      find the DVI output satisfactory, then you can insert the first of the 2
-      lines above into your $VIM/ftplugin/tex.vim file. $VIM is ~/vimfiles for
-      windows and ~/.vim for *nix machines.
-      
-      
-
---------------------------------------------------------------------------------
-Performing inverse searches                                   *lq_9_2* *lq_a_bn*
-                                                   *lsq-quick-inverse-searching*
-
-Most DVI viewers also support inverse searching, whereby you can make the DVI
-viewer ask vim to display the tex source corresponding to the DVI file being
-shown. This is extremeley helpful while proofreading large documents.
-
-Simply double-click anywhere in the viewer window. If the viewer supports it,
-then it will attempt to open an editor window at the location corresponding to
-where you double-clicked. On *nix platforms, Latex-Suite attempts to start the
-viewer program in such a way that it already knows to use vim to open the tex
-source. Thus you should see a vim window open up showing the tex file. However,
-if there is an error, or some other program is used, you will need to tell the
-viewer program to use gvim as the editor. On windows platforms, if you use the
-commonly available yap viewer (available as part of the miktex distribution),
-then this option can be set from View > Options > Inverse Search. In the Command
-line: window, write  >
-    "C:\Program Files\vim\vim61\gvim" -c ":RemoteOpen +%l %f"
-(Customize the path according to where you have installed gvim). If you double
-click in the view pane now, you will see gvim start up and take you to the
-relevant portion of the tex file.
-
-================================================================================
-Conclusions                                                    *lq_10* *lq_a_bo*
-                                                               *lsq-conclusions*
-
-
-
-Thats all folks! By now, you should know enough of the basic functions of
-latex-suite. Ofcourse, latex-suite is capable of much, much more such as
-compiling files multiple times to resolve changed labels, compiling
-dependencies, handling user packages and more. To get a feel for that, you will
-need to take a look at the Latex-Suite user manual. |lq_u_9|
-
-================================================================================
-URLs used in this file
-
-*lq_u_1* : http://vim.sf.net
-*lq_u_2* : http://vim-latex.sourceforge.net/index.php?subject=download&title=Download
-*lq_u_3* : http://vim-latex.sourceforge.net/documentation/latex-suite/latex-macros.html
-*lq_u_4* : http://vim-latex.sourceforge.net/documentation/latex-suite/auc-tex-mappings.html
-*lq_u_5* : http://vim-latex.sourceforge.net/documentation/latex-suite/latex-completion.html
-*lq_u_6* : http://vim-latex.sourceforge.net/index.php?subject=faq&title=FAQ#faq-2
-*lq_u_7* : http://vim-latex.sourceforge.net/documentation/latex-suite/latex-compiling.html
-*lq_u_8* : http://vim-latex.sourceforge.net/index.php?subject=faq&title=FAQ#faq-3
-*lq_u_9* : http://vim-latex.sourceforge.net/index.php?subject=manual&title=Manual#user-manual
-
-================================================================================
-About this file
-
-This file was created automatically from its XML variant using db2vim. db2vim is
-a python script which understands a very limited subset of the Docbook XML 4.2
-DTD and outputs a plain text file in vim help format.
-
-db2vim can be obtained via anonymous CVS from sourceforge.net. Use
-
-cvs -d:pserver:anonymous@cvs.vim-latex.sf.net:/cvsroot/vim-latex co db2vim
-
-Or you can visit the web-interface to sourceforge CVS at:
-http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/vim-latex/db2vim/
-
-The following modelines should nicely fold up this help manual.
-
-vim:ft=help:fdm=expr:nowrap
-vim:foldexpr=getline(v\:lnum-1)=~'-\\{80}'?'>2'\:getline(v\:lnum-1)=~'=\\{80}'?'>1'\:getline(v\:lnum)=~'=\\{80}'?'0'\:getline(v\:lnum)=~'-\\{80}'?'1'\:'='
-vim:foldtext=substitute(v\:folddashes.substitute(getline(v\:foldstart),'\\s*\\*.*',"",""),'^--','\ \ \ \ \ \ ','')
-================================================================================