diff options
Diffstat (limited to 'dot_vim/doc/latex-suite.txt')
| -rw-r--r-- | dot_vim/doc/latex-suite.txt | 3418 |
1 files changed, 0 insertions, 3418 deletions
diff --git a/dot_vim/doc/latex-suite.txt b/dot_vim/doc/latex-suite.txt deleted file mode 100644 index a44cd9b..0000000 --- a/dot_vim/doc/latex-suite.txt +++ /dev/null @@ -1,3418 +0,0 @@ - Latex-Suite Reference - *latex-suite.txt* - Srinath Avadhanula <srinath AT fastmail DOT fm> - Mikolaj Machowski <mikmach AT wp DOT pl> - - - - Abstract - ======== -Latex-Suite attempts to provide a comprehensive set of tools to view, edit and -compile LaTeX documents in Vim. Together, they provide tools starting from -macros to speed up editing LaTeX documents to functions for forward searching -.dvi documents. Latex-Suite has been possible because of the contributions of -many people. Please see latex-suite-credits [|ls_a_dU|] for a list of people who -have helped. - -Latex-Suite is released under the Vim charityware license. For license and -conditions of use look at |copyright|. Replace all occurrences of ``Vim'' with -``Latex-Suite''. The current copyright holders of Latex-Suite are Srinath -Avadhanula and Mikolaj Machowski. - -Homepage: http://vim-latex.sourceforge.net |ls_u_1| - - - - *latex-suite.txt-toc* -|ls_1| Installation and recommended Settings -|ls_2| Inserting Templates -|ls_3| Latex-Suite Macros - |ls_3_1| Environment Mappings - |ls_3_2| Command Mappings - |ls_3_3| Font Mappings - |ls_3_4| Section Mappings - |ls_3_5| Greek Letter Mappings - |ls_3_6| Auc-Tex Key Bindings - |ls_3_7| Diacritics - |ls_3_8| BibTeX Shortcuts - |ls_3_9| Smart Key Mappings - |ls_3_10| Alt Key Macros - |ls_3_11| Custom Macros - |ls_3_12| Making your own Macros via IMAP() -|ls_4| Package Handling - |ls_4_1| Inserting package commands - |ls_4_2| Actions taken for supported packages - |ls_4_3| Automatic Package detection - |ls_4_4| Writing supporting for a package -|ls_5| Latex Completion - |ls_5_1| Latex-Suite completion example - |ls_5_2| Latex-Suite \ref completion - |ls_5_3| Latex-Suite \cite completion - |ls_5_4| Latex-Suite filename completion - |ls_5_5| Custom command completion -|ls_6| LaTeX Compiling - |ls_6_1| Setting Compilation rules - |ls_6_2| Handling dependencies in compilation - |ls_6_3| Compiling multiple times - |ls_6_4| Customizing the compiler output - |ls_6_5| Compiling parts of a file -|ls_7| Latex Viewing and Searching - |ls_7_1| Setting Viewing rules - |ls_7_2| Forward Searching DVI documents - |ls_7_3| Inverse Searching -|ls_8| Latex Folding - |ls_8_1| Default Folding Scheme in Latex-Suite - |ls_8_2| Customizing what to fold - |ls_8_3| Editing the folding.vim file directly -|ls_9| Multiple file LaTeX projects - |ls_9_1| Latex-Suite project settings - |ls_9_2| Specifying which file to compile -|ls_10| Latex-Suite Commands and Maps - |ls_10_1| Latex-Suite Maps - |ls_10_2| Latex Suite Commands -|ls_11| Customizing Latex-Suite - |ls_11_1| General Settings - |ls_11_2| Place-Holder Customization - |ls_11_3| Macro Customization - |ls_11_4| Smart Key Customization - |ls_11_5| Latex Completion Customization - |ls_11_6| Compiler Customization - |ls_11_7| Viewer Customization - |ls_11_8| Menu Customization - |ls_11_9| Folding Customization - |ls_11_10| Package Handling Customization -|ls_12| Credits - -================================================================================ -Viewing this file - -This file can be viewed with all the sections and subsections folded to ease -navigation. By default, vim does not fold help documents. To create the folds, -press za now. The folds are created via a foldexpr which can be seen in the -last section of this file. - -See |usr_28.txt| for an introduction to folding and |fold-commands| for key -sequences and commands to work with folds. - -================================================================================ -Installation and recommended Settings *ls_1* *ls_a_bc* - *recommended-settings* - - - -If you are reading this, it most probably means that you have already installed -Latex-Suite and the help files. If this is not the case, follow the detailed -instructions on Latex-Suite's download page |ls_u_2|. - -Make sure that you create a few necessary settings in your ~/.vimrc. > - - " REQUIRED. This makes vim invoke Latex-Suite when you open a tex file. - filetype plugin on - - " IMPORTANT: win32 users will need to have 'shellslash' set so that latex - " can be called correctly. - set shellslash - - " IMPORTANT: grep will sometimes skip displaying the file name if you - " search in a singe file. This will confuse Latex-Suite. Set your grep - " program to always generate a file-name. - set grepprg=grep\ -nH\ $* - - " OPTIONAL: This enables automatic indentation as you type. - filetype indent on - - - -In addition, the following settings could go in your ~/.vim/ftplugin/tex.vim -file: > - " this is mostly a matter of taste. but LaTeX looks good with just a bit - " of indentation. - set sw=2 - " TIP: if you write your \label's as \label{fig:something}, then if you - " type in \ref{fig: and press <C-n> you will automatically cycle through - " all the figure labels. Very useful! - set iskeyword+=: - - - -================================================================================ -Inserting Templates *ls_2* *ls_a_bd* - *latex-suite-templates* - - - -This functionality is available via the TeX-Suite > Templates menu. This module -provides a way to insert custom templates at the beginning of the current file. - -When Latex-Suite first starts up, it scans the -$VIM/ftplugin/latex-suite/templates/ directory and creates menu items based on -the files found there. When you select a template from this menu, the file will -be read in above the first line of the current file. - -A template file can utilize placeholders for initializing the cursor position -when the template is read in and subsequent movement. In addition, template -files can contain dynamic elements such as the time of creation of a file etc, -by using vim expressions. - -You can place your own templates in the $VIM/ftplugin/latex-suite/templates/ -directory in order for them to be available via the menu. Unless Latex-Suite -releases a template with the same name, these files should not get over-written -when you install a new release over an existing one. - -NOTE: Templates are also accessible for non-gui users with the command - |:TTemplate|. The argument should be name of the corresponding template - file. If the command is called without arguments (preferred usage), then a - list of available templates is displayed and the user is asked to choose - one of them. - - - -================================================================================ -Latex-Suite Macros *ls_3* *ls_a_be* - *latex-macros* - -|ls_3_1| Environment Mappings -|ls_3_2| Command Mappings -|ls_3_3| Font Mappings -|ls_3_4| Section Mappings -|ls_3_5| Greek Letter Mappings -|ls_3_6| Auc-Tex Key Bindings -|ls_3_7| Diacritics -|ls_3_8| BibTeX Shortcuts -|ls_3_9| Smart Key Mappings -|ls_3_10| Alt Key Macros -|ls_3_11| Custom Macros -|ls_3_12| Making your own Macros via IMAP() - - -Latex-Suite ships with a very comprehensive set of insert mode and |visual-mode| -mappings and menu items to typeset most of the LaTeX elements. - -NOTE: These mappings are are not standard mappings in the sense that only the - last character is mapped. See plugin/imaps.vim for further documentation. - For example, in the case of the mapping EFI provided by Latex-Suite you - can press the characters 'E', 'F' and 'I' as slowly as you wish (unlike - the normal imap command where timeout issues are involved). The characters - are visible as you type them (unlike normal imaps) and you can use the - movement or backspace key to correct yourself unlike normal mappings. - - - *place-holder* *ls_a_dV* - *place-holders* *ls_a_eD* -NOTE: Place Holders - ------------- - Almost all macros provided in Latex-Suite implement Stephen Riem's - bracketing system and Gergely Kontra's JumpFunc() for handling - place-holders. This consists of using "place-holders" to mark off - locations where the next relevant editing has to be done. As an example, - when you type EFI in |insert-mode|, you will get the following: > - \begin{figure}[h] - \centerline{\psfig{figure=<+eps file+>}} - \caption{<+caption text+>} - \label{fig:<+label+>} - \end{figure}<++> -< The text <+eps file+> will be selected and you will be left in - |select-mode| so that you can continue typing straight away. After having - typed in the file name, you can press <Ctrl-J> (while still in - insert-mode). This will take you directly to the next "place-holder". i.e, - <+caption text+> will be visually selected with Vim in select mode again - for typing in the caption. This saves on a lot of key presses. - - - *overriding-macros* *ls_a_eE* -NOTE: Over-riding Latex-Suite Macros - ------------------------------ - If you wish to change these macros from their default values, for example, - if you wish to change `w to expand to \omega instead of its default - expansion to \wedge, you should use the IMAP function as described in the - Using IMAP() [|ls_a_bG|] section. - - An important thing to note is that if you wish to over-ride macros created - by Latex-Suite rather than merely create new macros, you should place the - IMAP() calls in a script which gets sourced after the files in - Latex-Suite. A good place typically is as a file-type plugin file in the - ~/.vim/after/ftplugin/ directory. (Use ~/vimfiles if you are using - WINDOWS). For example to over-ride `w to \omega instead of \wedge, place - the following line in (say) ~/.vim/after/ftplugin/tex_macros.vim: > - call IMAP('`w', '\omega', 'tex') -< - - NOTE: It is important to use a file-name which will get sourced on a - FileType event. Therefore you must use a file-name which conforms to - the standards as described in |ftplugin-name|. - - - - *pausing-imaps* *ls_a_eF* -NOTE: Pausing Macro expansion - ----------------------- - If you wish to temporarily suspend the imaps functionality, then you can - set the Imap_FreezeImap to 1. If you set g:Imap_FreezeImap to 1, then it - will be a system-wide setting. Setting b:Imap_FreezeImap will affect only - the current buffer. - - -The following sections describe the various editing macros provided by -Latex-Suite. - - --------------------------------------------------------------------------------- -Environment Mappings *ls_3_1* *ls_a_bf* - *environment-mappings* - -Latex-Suite provides a rich set of mappings to insert, enclose and modify LaTeX -environments, i.e, \begin{...} ... \end{...} pairs. - -Inserting Environments *ls_3_1_1* *ls_a_bg* - *inserting-environments* - -Latex-Suite provides the following ways to insert environments - - - -Method 1: Pressing <F5> *ls_3_1_1_1* *ls_a_bh* - *inserting-env-f5* - -If you press <F5> in the insert or normal mode while on an empty line, -Latex-Suite prompts you with a list of environments you might want to insert. -You can either choose one from the list or type in a new environment name. If -you press <F5> on a line which already has a word, then that word is used -instead of prompting. - -See Tex_Env_name [|ls_a_cZ|] for a description of how Latex-Suite uses the word -to form the expansion and how to modify Latex-Suite's behavior. - -The list of environments which Latex-Suite prompts you with (when <F5> is -pressed on an empty line) is formed from the Tex_PromptedEnvironments -[|ls_a_di|] setting. - -In addition to this setting, Latex-Suite also lists environments found in custom -packages as described in the section Package actions. [|ls_a_bL|] - - -Method 2: Using <S-F1>-<S-F4> *ls_3_1_1_2* *ls_a_bi* - *inserting-env-shift-f1* - -The shifted function keys, <S-F1> to <S-F4> can be mapped to insert very -commonly used environments. The environments mapped to each key can be -customized via the g:Tex_HotKeyMappings [|ls_a_dj|] setting. - - -Method 3: Using three letter sequences *ls_3_1_1_3* *ls_a_bj* - *inserting-env-threeletter* - -Environments can also be inserted by pressing a 3 capital letter sequence -starting with an E. The sequence of 3 letters generally tries to follow the -following rules: - - -1. All environment mappings begin with E - -2. If the environment can be broken up into 2 distinct words, such as flushright - (flush + right), then the next 2 letters are the first letters of the 2 - words. Example: > - flushleft (_f_lush + _l_eft) ---> EFL - flushright (_f_lush + _r_ight) ---> EFR - eqnarray (_e_qn + _a_rray) ---> EEA -< If on the other hand, the environment name cannot be broken up into 2 - distinct words, then the next 2 letters are the first 2 letters of the name - of the environment. Example: > - equation (_eq_uation) ---> EEQ -< -Unfortunately there are some environments that cannot be split in two words and -first two letters in name are identical. In this case shortcut is created from -E, first and last letter. Example: > - quote (_q_uot_e_) ---> EQE - quotation (_q_uotatio_n_) ---> EQN -Of course, not every last one of the environments can follow this rule because -of ambiguities. In case of doubt, pull down the Tex-Environments menu. The menu -item should give the hint for the map. - - -Enclosing in Environments *ls_3_1_2* *ls_a_bk* - *enclosing-environments* - -Latex-Suite provides visual-mode mappings which enclose visually selected -portions of text in environments. There are two ways provided to do this. - - - -Method 1: Pressing <F5> *ls_3_1_2_1* *ls_a_bl* - *enclosing-env-f5* - -You can also select a portion of text visually and press <F5> while still in -visual mode. This will prompt you with a list of environments. (This list can be -customized via the g:Tex_PromptedEnvironments [|ls_a_di|] setting). You can -either choose from this list or type in a new environment name. Once the -selection is done, Latex-Suite encloses the visually selected portion in the -chosen environment. - - -Method 2: Using three letter mappings *ls_3_1_2_2* *ls_a_bm* - *enclosing-env-threeletter* - -You can also select text visually and press a sequence of three characters -beginning with , (the single comma character) and the selected text will be -enclosed in the chosen environment. The three letter sequence follows directly -from the three letter sequence used to insert environments as described here -[|ls_a_bj|]. The following example describes the rule used: - -If ECE inserts a \begin{center}...\end{center} environment, then to enclose a -block of selected text in \begin{center}...\end{center}, simply select the text -and press ,ce. The rule simply says that the leading E is converted to , and the -next 2 letters are small case. -Some of the visual mode mappings are sensitive to whether you choose line-wise -or character-wise. For example, if you choose a word and press ,ce, then you get -\centerline{word}, whereas if you press ,ce on a line-wise selection, you get: > - \begin{center} - line - \end{center} - - - -Changing Environments *ls_3_1_3* *ls_a_bn* - *changing-environments* - -Pressing <S-F5> in normal mode detects which environment the cursor is presently -located in and prompts you to replace it with a new one. The innermost -environment is detected. For example, in the following source: > - \begin{eqnarray} - \begin{array}{ccc} - 2 & 3 & 4 - \end{array} - \end{eqnarray} -if you are located in the middle "2 & 3 & 4" line, then pressing <S-F5> will -prompt you to change the array environment, not the eqnarray environment. In -addition, Latex-Suite will also try to change lines within the environment to be -consistent with the new environment. For example, if the original environment -was an eqnarray environment with a \label command, then changing it to an -eqnarray* environment will delete the \label. - -Pressing <F5> in normal mode has the same effect as pressing <F5> in -insert-mode, namely you will be prompted to choose an environment to insert. - --------------------------------------------------------------------------------- -Command Mappings *ls_3_2* *ls_a_bo* - *latex-command-maps* - -Latex-Suite provides a rich set of mappings to insert, enclose and modify LaTeX -commands. - -Inserting LaTeX commands *ls_3_2_1* *ls_a_bp* - *inserting-commands* - - *ls-imap-f7* *ls_a_dW* - *ls-imap-s-f7* *ls_a_dX* -Pressing <F7> in insert or normal mode while the cursor is touching a word will -insert a command formed from the word touching the cursor. - -For certain common commands, Latex-Suite will expand them to include additional -arguments as needed. For example, frac becomes \frac{<++>}{<++>}<++>. Otherwise, -it will simply change the word under the cursor as follows > - word --> \word{<++>}<++> -You can define custom expansions of commands using the Tex_Com_{name} setting as -described in here [|ls_a_da|]. - -If <F7> is pressed when the cursor is on white-space, then Latex-Suite will -prompt you to choose a command and insert that instead.The list of commands is -constructed from the g:Tex_PromptedCommands [|ls_a_dk|] setting and also from -commands which Latex-Suite finds while scanning custom packages which -Latex-Suite finds. See the Package actions [|ls_a_bL|] section for details on -which files are scanned etc. - - -Enclosing in a command *ls_3_2_2* *ls_a_bq* - *enclosing-commands* - -You can select a portion of text visually and press <F7> while still in visual -mode. This will prompt you with a list of commands. (This list can be customized -via the g:Tex_PromptedCommands [|ls_a_dk|] setting). You can either choose from -this list or type in a new command name. Once the selection is done, Latex-Suite -encloses the visually selected portion in the chosen command. - - -Changing commands *ls_3_2_3* *ls_a_br* - *changing-commands* - - *ls-vmap-f7* *ls_a_dY* -In both insert and normal mode <S-F7> will find out if you are presently within -an environment and then prompt you with a list of commands to change it to. - --------------------------------------------------------------------------------- -Font Mappings *ls_3_3* *ls_a_bs* *font-maps* - -These mappings insert font descriptions such as: \textsf{<++>}<++> with the -cursor left in place of the first placeholder [|ls_a_eD|] (the <++> characters). - -Mnemonic: -1. first letter is always F (F for font) - -2. next 2 letters are the 2 letters describing the font. - -Example: Typing FEM in insert-mode expands to \emph{<++>}<++>. - -Just like environment mappings, you can visually select an area and press `sf to -have it enclosed in: \textsf{word} or > - {\sffamily - line - } -depending on character-wise or line-wise selection. - --------------------------------------------------------------------------------- -Section Mappings *ls_3_4* *ls_a_bt* - *section-mappings* - -These maps insert LaTeX sections such as: > - \section{<++>}<++> -etc. Just as in the case of environments and fonts, can be enclosed with a -visual selection. The enclosing is not sensitive to character or line-wise -selection. - -Mnemonic: (make your own!) > - SPA for part - SCH for chapter - SSE for section - SSS for subsection - SS2 for subsubsection - SPG for paragraph - SSP for subparagraph - - -Example: SSE in insert mode inserts > - \section{<++>}<++> -If you select a word or line and press ,se, then you get > - \section{section name} -The menu item in Tex-Environments.Sections have a sub-menu called 'Advanced'. -Choosing an item from this sub-menu asks a couple of questions (whether you want -to include the section in the table of contents, whether there is a shorter name -for the table of contents) and then creates a more intelligent template. - --------------------------------------------------------------------------------- -Greek Letter Mappings *ls_3_5* *ls_a_bu* - *greek-letter-mappings* - -Lower case - -`a through `z expand to \alpha through \zeta.Upper case: - - > - `D = \Delta - `F = \Phi - `G = \Gamma - `Q = \Theta - `L = \Lambda - `X = \Xi - `Y = \Psi - `S = \Sigma - `U = \Upsilon - `W = \Omega -NOTE: LaTeX does not support upper case for all greek alphabets. - - -Just like other Latex-Suite mappings, these mappings are not created using the -standard imap command. Thus you can type slowly, correct using <BS> etc. - --------------------------------------------------------------------------------- -Auc-Tex Key Bindings *ls_3_6* *ls_a_bv* - *auc-tex-mappings* - -These are simple 2 key expansions for some very commonly used LaTeX elements: - - > - `^ Expands To \Hat{<++>}<++> - `_ expands to \bar{<++>}<++> - `6 expands to \partial - `8 expands to \infty - `/ expands to \frac{<++>}{<++>}<++> - `% expands to \frac{<++>}{<++>}<++> - `@ expands to \circ - `0 expands to ^\circ - `= expands to \equiv - `\ expands to \setminus - `. expands to \cdot - `* expands to \times - `& expands to \wedge - `- expands to \bigcap - `+ expands to \bigcup - `( expands to \subset - `) expands to \supset - `< expands to \le - `> expands to \ge - `, expands to \nonumber - `~ expands to \tilde{<++>}<++> - `; expands to \dot{<++>}<++> - `: expands to \ddot{<++>}<++> - `2 expands to \sqrt{<++>}<++> - `| expands to \Big| - `I expands to \int_{<++>}^{<++>}<++> -(again, notice the convenient place-holders) - -In addition the visual mode macros are provided: - - > - `( encloses selection in \left( and \right) - `[ encloses selection in \left[ and \right] - `{ encloses selection in \left\{ and \right\} - `$ encloses selection in $$ or \[ \] depending on characterwise or - linewise selection - - --------------------------------------------------------------------------------- -Diacritics *ls_3_7* *ls_a_bw* - *diacritic-mappings* - -These mappings speed up typing European languages which contain diacritic -characters such as a-umlaut etc. > - +<l> expands to \v{<l>} - =<l> expands to \'{<l>} -where <l> is an alphabet. - - > - +} expands to \"{a} - +: expands to \^{o} -Latex-Suite also ships with smart backspacing [|ls_a_dZ|] functionality which -provides another convenience while editing languages with diacritics. - -NOTE: Diacritics are disabled by default in Latex-Suite because they can - sometimes be a little too intrusive. Moreover, most European users can - nowadays use font encodings which display diacritic characters directly - instead of having to rely on Latex-Suite's method of displaying - diacritics. - - Set the g:Tex_Diacritics [|ls_a_df|] variable to enable diacritics. - - - --------------------------------------------------------------------------------- -BibTeX Shortcuts *ls_3_8* *ls_a_bx* - *bibtex-bindings* - -Latex-Suite provides an easy way of entering bibliographic entries. Four -insert-mode mappings: BBB, BBL, BBH and BBX are provided, all of which -essentially act in the same manner. When you type any of these in insert-mode, -you will get a prompt asking you to choose a entry type for the bibliographic -entry. - -When you choose an entry type, a bibliographic entry template will be inserted. -For example, if you choose the option 'book' via the map BBB, then the following -template will be inserted: > - @BOOK{<+key+>, - author = {<++>}, - editor = {<++>}, - title = {<++>}, - publisher = {<++>}, - year = {<++>}, - otherinfo = {<++>} - }<++> - - -<+key+> will be highlighted in select-mode and you can type in the bib-key. -After that you can use <Ctrl-J> to navigate to successive locations in the -template and enter new values. - -BBB inserts a template with only the fields mandatorily required for a given -entry type. BBL inserts a template with commonly used extra options. BBH inserts -a template with more options which are not as commonly used. BBX inserts a -template with all the fields which the entry type supports. - -NOTE: Mnemonic - -------- - B for Bibliographic entry, L for Large entry, H for Huge entry, and X - stands for all eXtras. - - - - -Customizing Bib-TeX fields *ls_3_8_1* *ls_a_by* - *adding-bib-options* - -If you wish the BBB command to insert a few additional fields in addition to the -fields it creates, then you will need to define global variables of the form > - g:Bib_{type}_options -in you $VIM/ftplugin/bib.vim file, where {type} is a string like 'article', -'book' etc. This variable should contain one of the letters defined in the -following table - -Character Field Type~ -w address -a author -b booktitle -c chapter -d edition -e editor -h howpublished -i institution -k isbn -j journal -m month -z note -n number -o organization -p pages -q publisher -r school -s series -t title -u type -v volume -y year - -For example, by default, choosing 'article' via BBB inserts the following -template by default > - @ARTICLE{<+key+>, - author = {<++>}, - title = {<++>}, - journal = {<++>}, - year = {<++>}, - otherinfo = {<++>} - }<++> -However, if g:Bib_article_options is defined as 'mnp', then 'article' will -insert the following template > - @ARTICLE{<+key+>, - author = {<++>}, - title = {<++>}, - journal = {<++>}, - year = {<++>}, - month = {<++>}, - number = {<++>}, - pages = {<++>}, - otherinfo = {<++>} - }<++> - - -If you have some other fields you wish to associate with an article which are -not listed above, then you will have to use the Bib_{type}_extrafields option. -This is a newline separated string of complete field names which will be -included in the template. For example, if you define > - let g:Bib_article_extrafields = "crossref\nabstract" -then the article template will include the lines > - crossref = {<++>}, - abstract = {<++>}, - - -NOTE: You will need to define Bib_* settings in your - $VIMRUNTIME/ftplugin/bib.vim file. - - - --------------------------------------------------------------------------------- -Smart Key Mappings *ls_3_9* *ls_a_bz* - *smart-keys* - -Latex-Suite ships with the following smart keys: - -Smart Backspace ---------------- - *smart-backspace* *ls_a_dZ* -Pressing <BS> in insert mode checks to see whether we are just after something -like \'{a} and if so, deletes all of it. i.e, diacritics are treated as single -characters for backspacing. - -Smart Quotes ------------- -Pressing " (English double quote) will insert `` or '' by making an intelligent -guess about whether we intended to open or close a quote. - -Smart Space ------------ -Latex-Suite maps the <space> key in such a way that $ characters are not broken -across lines. It does this by first setting tw=0 so that Vim will not -automatically break lines and then maps the <space> key to insert newlines -keeping $$'s on the same line. - -Smart Dots ----------- -Pressing ... (3 dots) results in \ldots outside math mode and \cdots in math -mode. - --------------------------------------------------------------------------------- -Alt Key Macros *ls_3_10* *ls_a_bA* - *altkey-mappings* - -Latex-Suite utilizes a set of macros originally created by Carl Mueller in -auctex.vim to make inserting all the \left ... \right stuff very easy and to -also make some use of the heavily under-utilized <Alt> key. - -NOTE: By default, typing Alt-<key> in Vim takes focus to the menu bar if a menu - with the hotkey <key> exists. If in your case, there are conflicts due to - this behavior, you will need to set > - set winaltkeys=no -< in your $VIM/ftplugin/tex.vim in order to use these maps. - - -NOTE: Customizing the maps - -------------------- - If for some reason, you wish to not map the <Alt> keys, (some European - users need to use the <Alt> key to enter diacritics), you can change these - maps to other keys as described in the section Customizing Alt-key maps - [|ls_a_cx|]. - - - - -<Alt-L> *ls_3_10_1* *ls_a_bB* *Alt-L* - -This is a polymorphic insert-mode mapping which expands to one of the following -depending on the character just before the cursor location. - -Character before cursor Expansion~ -( \left( <++> \right) -[ \left[ <++> \right] -| \left| <++> \right| -{ \left\{ <++> \right\} -< \langle <++> \rangle -q \lefteqn{<++>}<++> - -If the character before the cursor is none of the above, then it will simply -insert a \label{<++>}<++>. - - -<Alt-B> *ls_3_10_2* *ls_a_bC* *Alt-B* - -This insert-mode mapping encloses the previous character in \mathbf{}. - - -<Alt-C> *ls_3_10_3* *ls_a_bD* *Alt-C* - -In insert mode, this key is polymorphic as follows: - - -1. If the previous character is a letter or number, then capitalize it and - enclose it in \mathcal{}. - -2. otherwise insert \cite{}. -In visual mode, it will simply enclose the selection in \mathcal{} - - -<Alt-I> *ls_3_10_4* *ls_a_bE* *Alt-I* - -This mapping inserts an \item command at the current cursor location depending -on which environment the cursor is enclosed in. The style of the \item command -is dependent on the enclosing environment. By default, <Alt-I> has styles -defined forthe following environments: - -Environment Style~ -itemize \item -enumerate \item -theindex \item -thebibliography \item[<+biblabel+>]{<+bibkey+>} <++> -description \item[<+label+>] <++> - -<Alt-I> is intelligent enough to account for nested environments. For example, > - \begin{itemize} - \item first item - \item second item - \begin{description} - \item[label1] first desc - \item[label2] second - % <Alt-I> will insert "\item[<+label+>] <++>" if - % used here - \end{description} - \item third item - % <Alt-I> will insert "\item " when if used here. - \end{itemize} - % <Alt-I> will insert nothing ("") if used here -< - -The style used by <Alt-I> can be customized using the -g:Tex_ItemStyle_environment [|ls_a_dl|] variable. - --------------------------------------------------------------------------------- -Custom Macros *ls_3_11* *ls_a_bF* - *custom-macros-menu* - -This functionality available via the TeX-Suite.Macros menu, provides a way of -inserting customized macros into the current file via the menu. - -When Latex-Suite starts up, it scans the $VIM/ftplugin/latex-suite/macros/ -directory and creates a menu from the files found there. Each file is considered -as a single macro. You can place your own macros in this directory, using -placeholders [|ls_a_eD|] if wanted. - -When you choose a macro from the menu, the corresponding file is read into the -current buffer after the current cursor position. In non-gui mode, you can use -the |TMacro| command instead of choosing from the menu. This command takes the -macro file name as an argument. When called without arguments (preferred usage), -then a list of available macro files is displayed and the user is prompted to -choose one of them). - -There are some other tools provided in this menu, namely: - - -{New} Creates a new (unnamed) buffer in the latex-suite/macros/ directory. - Use the command :TexMacroNew in non-gui mode. -{Edit} Opens up the corresponding macro file for editing. Use |:TexMacroEdit| - in non-gui mode. When you try to edit {macro} not from local directory - Latex-Suite will copy it to your local directory with suffix "-local". - If local copy already exists Latex-Suite prompt for overwriting it. -{Delete} Deletes the corresponding macro. Use the prefixed numbers for fast - navigation of menus. Use |:TexMacroDelete| in non-gui mode. When you - choose to delete {macro} which is not in your local directory - Latex-Suite will refuse to delete it. -{Redraw} Rescans the macros/ directories and refreshes the macros list. - --------------------------------------------------------------------------------- -Making your own Macros via IMAP() *ls_3_12* *ls_a_bG* - *ls-new-macros* - -If you find the need to create your own macros, then you can use the IMAP() -function provided with Latex-Suite. See [|ls_a_bH|] for a short explanation of -why you might prefer IMAP() over Vim's standard :imap command. An example best -explains the usage: > - :call IMAP('NOM', '\nomenclature{<++>}<++>', 'tex') -This will create a Latex-Suite-style mapping, where if you type NOM in insert -mode, you will get \nomenclature{<++>}<++> with the cursor left in place of the -first <++> characters. See [|ls_a_bI|] for a detailed explanation of the IMAP() -command. - -For maps which are triggered for a given filetype, the IMAP() command above -should be put in the filetype plugin script for that file. For example, for -tex-specific mappings, the IMAP() calls should go in $VIM/ftplugin/tex.vim. For -globally visible maps, you will need to use the following in either your -~/.vimrc or a file in your $VIM/plugin directory. > - augroup MyIMAPs - au! - au VimEnter * call IMAP('Foo', 'foo', '') - augroup END - - - - -Why use IMAP() *ls_3_12_1* *ls_a_bH* - *why-IMAP* - -Using IMAP instead of Vim's built-in :imap command has a couple of advantages: -1. The 'ttimeout' option will generally limit how easily you can type the left - hand side for a normal :imap. if you type the left hand side too slowly, then - the mapping will not be activated. - -2. If you mistype one of the letters of the lhs, then the mapping is deactivated - as soon as you backspace to correct the mistake. - -3. The characters in lhs are shown on top of each other. This is fairly - distracting. This becomes a real annoyance when a lot of characters initiate - mappings. - - -IMAP() syntax *ls_3_12_2* *ls_a_bI* - *ls-imaps-syntax* - -Formally, the syntax which is used for the IMAP function is: > - call IMAP (lhs, rhs, ft [, phs, phe]) - - -Argument Explanation~ -lhs This is the "left-hand-side" of the mapping. When you use IMAP, only - the last character of this word is actually mapped, although the - effect is that the whole word is mapped. - - If you have two mappings which end in a common lhs, then the mapping - with the longer lhs is used. For example, if you do > - call IMAP('BarFoo', 'something', 'tex') - call IMAP('Foo', 'something else', 'tex') -< Then typing BarFoo inserts "something", whereas Foo by itself inserts - "something else". - - Also, the nature of IMAP() makes creating certain combination of - mappings impossible. For example if you have > - call IMAP('foo', 'something', 'tex') - call IMAP('foobar', 'something else', 'tex') -< Then you will never be able to trigger "foobar" because typing "foo" - will immediately insert "something". This is the "cost" which you - incur over the normal :imap command for the convenience of no - 'timeout' problems, the ability to correct lhs etc. - - -rhs The "right-hand-side" of the mapping. This is the expansion you will - get when you type lhs. - - This string can also contain special characters such as <enter> etc. - To do this, you will need to specify the second argument in - double-quotes as follows: > - :call IMAP('EFE', "\\begin{figure}\<CR><++>\\end{figure}<++>", 'tex') -< With this, typing EFE is equivalent to typing in the right-hand side - with all the special characters in insert-mode. This has the advantage - that if you have filetype indentation set up, then the right hand side - will also be indented just as if you had typed it in normally. - - *IMAP_PutTextWithMovement* *ls_a_ea* - You can also set up a Latex-Suite style mapping which calls a custom - function as follows: > - :call IMAP('FOO', "\<C-r>=MyFoonction()\<CR>", 'tex') -< where MyFoonction is a custom function you have written. If - MyFoonction also has to return a string containing <++> characters, - then you will need to use the function IMAP_PutTextWithMovement(). An - example best explains the usage: - - > - call IMAP('FOO', "\<C-r>=AskVimFunc()\<CR>", 'vim') - " Askvimfunc: Asks For Function Name And Sets Up Template - " Description: - function! AskVimFunc() - let name = input('Name of the function : ') - if name == '' - let name = "<+Function Name+>" - end - let islocal = input('Is this function scriptlocal ? [y]/n : ', 'y') - if islocal == 'y' - let sidstr = '<SID>' - else - let sidstr = '' - endif - return IMAP_PutTextWithMovement( - \ "\" ".name.": <+short description+> \<cr>" . - \ "Description: <+long description+>\<cr>" . - \ "\<C-u>function! ".name."(<+arguments+>)<++>\<cr>" . - \ "<+function body+>\<cr>" . - \ "endfunction \" " - \ ) - endfunction -< - - -ft The file type for which this mapping is active. When this string is - left empty, the mapping applies for all file-types. A filetype - specific mapping will always take precedence. - - -phs, phe If you prefer to write the rhs with characters other than <+ and +> to - denote place-holders, you can use the last 2 arguments to specify - which characters in the rhs specify place-holders. By default, these - are <+ and +> respectively. - - Note that the phs and phe arguments do not control what characters - will be displayed for the placeholders when the mapping is actually - triggered. What characters are used to display place-holders when you - trigger an IMAP are controlled by the Imap_PlaceHolderStart - [|ls_a_cV|] and Imap_PlaceHolderEnd [|ls_a_er|] settings. - - - -================================================================================ -Package Handling *ls_4* *ls_a_bJ* - *latex-packages* - -|ls_4_1| Inserting package commands -|ls_4_2| Actions taken for supported packages -|ls_4_3| Automatic Package detection -|ls_4_4| Writing supporting for a package - - -Latex-Suite has a lot of functionality written to ease working with packages. -Packages here refers to files which you include into the LaTeX document using -the \usepackage command. - - --------------------------------------------------------------------------------- -Inserting package commands *ls_4_1* *ls_a_bK* - *inserting-packages* - -When you first invoke Latex-Suite, it scans the -$VIM/ftplugin/latex-suite/packages directory for package script files and -creates a menu from all the files found there. This menu is created under -TeX-Suite > Packages > Supported. This menu contains a list of packages -"supported" by Latex-Suite. When you choose one of the packages from this menu -(for example the amsmath package), then a line of the form > - \usepackage[<++>]{amsmath}<++> -will be inserted into the current file. - -The \usepackage line can also be inserted in an easy manner in the current file -by pressing <F5> while in the preamble of the current document. This will set up -a prompt from the supported packages and ask you to choose from one of them. If -you do not find the package you want to insert in the list, you can type in a -package-name and it will use that. Pressing <F5> in the preamble on a line -containing a single word will construct a \usepackage line from that word. - -You can also use the TPackage [|ls_a_cD|] to insert the \usepackage line. - -Once you have inserted a \usepackage line, for supported packages, you can use -the Options and Commands menus described in the next section [|ls_a_bL|]. - --------------------------------------------------------------------------------- -Actions taken for supported packages *ls_4_2* *ls_a_bL* - *package-actions* - -Latex-Suite takes the following actions for packages detected when a file is -loaded, or a new \usepackage line is inserted using one of the methods described -in the previous section [|ls_a_bK|]. - -If you are using the GUI and you have g:Tex_Menus [|ls_a_dI|] set to 1, -Latex-Suite will create the following sub-menus -TeX-Suite > Packages > <package> Options - -TeX-Suite > Packages > <package> Commands - -where <package> is the package you just inserted (or was detected). You can use -these menus to insert commands, environments and options which Latex-Suite -recognizes as belonging to this package. - -NOTE: While inserting an option, you need to position yourself in the - appropriate place in the document, most commonly inside the square braces - in the \usepackage[]{packname} command. Latex-Suite will not navigate to - that location. - - -In addition to creating these sub-menus, Latex-Suite will also scan the -$VIM/ftplugin/latex-suite/dictionaries directory and if a dictionary file -corresponding to the package file is found, then it will add the file to the -'dict' setting in Vim so you can use the <C-X><C-K> command to complete words -from that file. - -For example, the SIUnits package has a custom dictionary. - - *latex-package-scanning* *ls_a_eb* -If a package detected at startup is found by Latex-Suite in the current -directory or in a location specified by the g:Tex_TEXINPUTS [|ls_a_dT|] -variable, Latex-Suite will scan the package for \newenvironment and newcommand -lines and also append any commands and environments found to the list of -commands and environments which you are prompted with when you press <F5> -[|ls_a_bh|] or <F7> [|ls_a_dW|] in insert mode. -In addition, the TeX-Suite > Packages menu also contains the following submenus - -Update ------- -This command is to be invoked with the cursor placed on the package name. If the -corresponding package is found, then a sub-menu with the supported commands and -options is created. - -Update All ----------- -This function reads the preamble of the document for \usepackage lines and if -Latex-Suite supports the detected packages, then sub-menus containing the -package options and commands are created. - - --------------------------------------------------------------------------------- -Automatic Package detection *ls_4_3* *ls_a_bM* - *automatic-package-detection* - -Whenever Latex-Suite begins editing a new LaTeX file, it scans it for -\usepackage{name} lines, and if a supported package is found, then it will -create sub-menus and add to the 'dict' setting as described above. - -If a master-file [|ls_a_ct|] has been specified, then it will scan that file -instead of the current file. See the section Custom Packages [|ls_a_bN|] to see -which files Latex-Suite will scan in more detail. - -For all the packages detected in this manner, Latex-Suite will take certain -actions as described in the section package support. [|ls_a_bL|]. - - - -Custom Packages *ls_4_3_1* *ls_a_bN* - *custom-packages* - -Often times, the preamble can become too long, and some people prefer to put -most of their personalization in a custom package and include that using a -\usepackage line. Latex-Suite tries to search such customs package for other -\usepackage lines, so that supported packages included in this indirect manner -can also be used to create sub-menus, extend the 'dict' setting etc. The most -obvious place to place such custom packages is in the same directory as the -edited file. In addition, LaTeX also supports placing custom packages in places -pointed to by the $TEXINPUTS environment variable. - -If you use the $TEXINPUTS variable in LaTeX, and you wish Latex-Suite to search -these custom packages for \usepackage lines, then you need to initialize the -g:Tex_TEXINPUTS [|ls_a_dT|] variable. - -The g:Tex_TEXINPUTS variable needs to be set in the same format which Vim uses -for the 'path' setting. This format is explained in detail if you do > - :help file-searching -from within Vim. - -Therefore the value of g:Tex_TEXINPUTS will most probably be different from -$TEXINPUTS which your native LaTeX distribution uses. - -Example: > - let g:Tex_TEXINPUTS = '~/texmf/mypackages/**,./**' -The ** indicates that all directories below the directory ~/texmf/mypackages and -./ are to be scanned for custom packages. - -NOTE: The present directory '.' is always searched. You need not include that in - g:Tex_TEXINPUTS. - - - --------------------------------------------------------------------------------- -Writing supporting for a package *ls_4_4* *ls_a_bO* - *supporting-packages* - -Supporting a package is easy and consists of writing a vim script with the same -name as the package and placing it in the $VIM/ftplugin/latex-suite/packages -directory. A package script should define two variables as described in the next -two sections. In addition to these two variables, you can also define any -functions, environment definitions etc. in this file. - - - -g:Tex_package_option_<package> *ls_4_4_1* *ls_a_bP* - -This setting is a string containing a comma separated list of options supported -by this package. - -Example: > - g:Tex_package_option_mypack = 'opt1,opt2=,sbr:group1,opt3,opt4' -The = suffix means that the option takes a value. Use sbr:group name to separate -options into sub-menus. All successive options will be clubbed into the group1 -sub-menu till the next sbr: option is encountered. - - -g:Tex_package_<package> *ls_4_4_2* *ls_a_bQ* - - > - - g:TeX_package_<package> = "pre:Command,pre:Command1" - More detailed example is in latex-suite/packages/exmpl file (slightly - outdated). - Here is short summary of prefixes which can be used in package files: - (x - place with cursor, <++> - |placeholder|) - - {env:command} Environment: creates simple environment template - \begin{command} - x - \end{command}<++> - {eno:command} Environment with option: - \begin[x]{command} - <++> - \end{command}<++> - {ens:command[<<option>>]...} Environment special: - \begin[<<option>>]...{command} - <++> - \end{command}<++> - {bra:command} Brackets: - \command{x}<++> - {brd:command} Brackets double: - \command{x}{<++>}<++> - {brs:command[<<option>>]...} Brackets special (as environment special: - \command[<+x+>]{<++>}{<++>}<++> - {nor:command} Normal: - \command<Space - {noo:command} Normal with option: - \command[x]<++> - {nob:command} Normal with option and brackets: - \command[x]{<++>}<++> - {pla:command} Plain: - command<Space - {spe:command} Special: - command <-literal insertion of command - {sep:command} creates separator. Good for aesthetics and usability :) - {sbr:command} Breaks menu into submenus. <command> will be title of submenu. - Can be used also in package variable. - - Command can be also given without prefix:. The result is - \command - - - -================================================================================ -Latex Completion *ls_5* *ls_a_bR* - *latex-completion* - -|ls_5_1| Latex-Suite completion example -|ls_5_2| Latex-Suite \ref completion -|ls_5_3| Latex-Suite \cite completion -|ls_5_4| Latex-Suite filename completion -|ls_5_5| Custom command completion - - -Latex-Suite provides an easy way to insert references to labels and -bibliographic entries and also provide filename arguments to commands such as -\includegraphics. Although the completion capabilities are very diverse, -Latex-Suite only uses a single key (<F9> by default) to do all of it. Pressing -the <F9> key does different things based on where you are located. Latex-Suite -tries to guess what you might be trying to complete at the location where you -pressed <F9>. For example, pressing <F9> when you are within a \ref command will -try to list the \label's in the present directory. Pressing it when you are in a -\cite command will list bibliography keys. Latex-Suite also recognizes commands -which need a file name argument and will put up an explorer window for you to -choose a filename. - - *ls-set-grepprg* *ls_a_eG* -NOTE: Before you start with Latex-Suite's completion function... - ---------------------------------------------------------- - All of Latex-Suite's completion capabilities depend on a external program - being available on your system which can search through a number of files - for a reg-exp pattern. On *nix systems, the pre-installed grep utility is - more than adequate. Most windows systems come with a utility findstr, but - that has proven to be very inadequate (for one, it does not have an option - to force the file name to be displayed when searching through a single - file). Your best bet is to install cygwin |ls_u_3|, but if you think - that's overkill, you can search for |ls_u_4| a windows implementation of - GNU grep. (Latex-Suite testing on windows has been done with cygwin's port - of GNU grep). - - Once you have a grep program installed, you need to set the 'grepprg' - option for vim. Make sure you use a setting which forces the program to - display file names even when you are searching through a single file. For - GNU grep, the syntax is > - set grepprg=grep\ -nH\ $* -< - - - --------------------------------------------------------------------------------- -Latex-Suite completion example *ls_5_1* *ls_a_bS* - *ls-completion-usage* - -Consider the situation where you are editing a file with two equations labelled -eqn:euler and eqn:einstein. Now you want to insert a reference to one of these -equations. To do this, you type the \ref{eqn:} command and with the cursor -placed after eqn:, press <F9>. This will bring up two new windows beneath the -main window you were working in as shown in the figure below. > - - 8 These are a couple of equations: - 9 +-- 4 lines: eqnarray (eqn:euler) : e^{j\pi} + 1 &=& 0--------------- - 13 +-- 4 lines: equation (eqn:einstein) : E = m c^2--------------------- - 17 - 18 These are a couple of figures: - 19 +-- 7 lines: figure (fig:monkeys) : Monkeys can Type------------------- - 26 +-- 7 lines: figure (fig:shakespeare) : Shakespeare could not type----- - 33 - 34 This is a reference to \ref{eqn:}<++> - 35 - 36 - 37 \end{document} - 38 - ~ - ~ - ~ - newfile.tex 34,32 Bot - newfile.tex|11| \label{eqn:euler} - newfile.tex|15| \label{eqn:einstein} - ~ - [Error List] 1,1 All - 7 - 8 These are a couple of equations: - 9 \begin{eqnarray} - 10 e^{j\pi} + 1 &=& 0 - 11 \label{eqn:euler} - 12 \end{eqnarray} - 13 \begin{equation} - 14 E = m c^2 - 15 \label{eqn:einstein} - 16 \end{equation} - newfile.tex [Preview] 11,3 21% - - - -The first window (shown as [ErrorList] above) is a |cwindow| containing a list -of possible matches for the reference. The cursor will be located in the first -line of this window. The bottom window is a preview-window showing the context -of the \label. Moving around in the [ErrorList] window automatically scrolls the -preview window so as to always keep showing the context of the \label being -viewed in the [ErrorList] window. You can also press J and K in the [ErrorList] -window to scroll the preview window up and down. - -To insert one of the labels, simply position the cursor in the correct line in -the [ErrorList] window and press <enter>. This will immediately close the two -newly opened windows, get back to the correct location in the original file -being edited and insert the label into the \ref command. - -If you notice carefully in the example above, the [ErrorList] window only showed -the matches for the equations and did not list any of the figure labels. This is -because we pressed <F9> after \ref{eqn: instead of simply after \ref{. This -caused Latex-Suite to search only for those labels which started with the string -eqn:. If you had pressed <F9> after a \ref{, you would have been shown matches -from _all_ labels, not just those starting with eqn:. - -Thus prefixing all your labels with eqn:, fig:, tab: etc. depending on what you -are labelling will lead to an easier time completing references. - --------------------------------------------------------------------------------- -Latex-Suite \ref completion *ls_5_2* *ls_a_bT* - *ls-completion-ref* - -Pressing <F9> when you are within a partially completed \ref command will split -open a window (named __OUTLINE__) which contains a nicely formatted list of all -the \labels found in the present project. The \labels are heirarchically -arranged according to which \section, \subsection etc of the overall document -structure they are present in. For example, when you first press <F9> after -typing \ref{, you should see something like: > - - +-- 54 lines: 2. Kinematics-------------------------------- - +-- 98 lines: 3. Aerodynamics of the MFI thorax------------ - +-- 40 lines: 4. Jump Resonance in Fourbar Mechanisms------ - +-- 28 lines: 5. Design and Fabrication Issues------------- - -Each chapter is |fold|ed away so that you can quickly jump to the correct -section/subsection in which the relevant equation is defined. This makes -inserting references significantly faster for large projects with hundreds of -equations. You can then open some of the folds to see for example: > - - +-- 54 lines: 2. Kinematics-------------------------------- - 3. Aerodynamics of the MFI thorax - 3.1. Aerodynamic modeling of the MFI wing forces - 3.1.1. Geometric Specification - eqn:wingnormal-pos - \nhat = T_z(\theta_2) T_y(\theta_y)T_x(\theta_x)\nhat_0, - eqn:T-1 - T_1(\theta_2) &=& T_z(\theta_2) - -The <Tab> key is mapped in this window to toggle folds so that you can quickly -open/close folds in order to navigate the heirarchy faster. Once you are -positioned on a label, press <Enter>. This closes the __OUTLINE__ window, -returns to the window in which you pressed <F9> and inserts the reference at the -current cursor position. - -NOTE: Filtering labels by prefix - -------------------------- - You can press <F9> after typing part of the \label. In this case, - Latex-Suite only presents \labels which begin with the already filled - characters. You can use this to choose between equations, figures, tables - etc. if you consistently label equations to begin with eqn:, figures to - begin with fig: etc. For example, with this scheme, pressing <F9> after - typing \ref{eqn: will only list equations. - - -NOTE: Latex-Suite works the same way if you press <F9> after any command which - contains the letters ref. Thus you can complete \eqref in exactly the same - manner. - - -NOTE: Requirements - ------------ - This method of preseting the \labels depends on Vim being compiled with - python support. To check if you have this, see the output of the :ver - command. If you see something like +python, you are all set. Failing this, - you will need to have python somewhere in your $PATH. - - - --------------------------------------------------------------------------------- -Latex-Suite \cite completion *ls_5_3* *ls_a_bU* - *latex-completion-cite* - -Latex-Suite provides an easy way to insert references to bibliographic entries. -Pressing <F9> when the cursor is placed inside a partially completed \cite -command will split open a new window (named __OUTLINE__) which contains a -formatted and syntax highlighted list of all bibtex entries found. For example, -pressing <F9> after typing \ref{ should present you with a window which looks -something like this: > - - Article [dickinson:science:99] - "Wing rotation and aerodynamic basis of insect flight" - M. H. Dickinson and F-O. Lehman and S. P. Sane - In Science, 1999 - - Article [ellington:84:part1] - "The Aerodynamics of Hovering Insect Flight. I. The Quasi-Steady Analysis" - Ellington, C P - In Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences, 1984 - - Article [ellington:84:part2] - "The Aerodynamics of Hovering Insect Flight. II. Morphological Parameters" - Ellington, C P - In Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences, 1984 - - - -You can easily jump from one entry to another using the 'n' and 'p' keys (to go -to the next / previous entry respectively). - -You can also filter out a subset of the bibtex entries by pressing 'f' while in -this window. Doing this presents the following prompt: > - - Field acronyms: (`:let g:Tex_EchoBibFields = 0` to avoid this message) - [t] title [a] author [b] booktitle - [j] journal [y] year [p] bibtype - (you can also enter the complete field name) - Enter filter criterion [field<space>value]: - -At the prompt, type > - a ellington -Notice that the letter a is an acronym for author according to the prompt above. -Therefore this filter only shows those bibtex entries whose author field -contains the text ellington. You can keep narrowing your selection by repeatedly -filtering the results. If you would like to remove all the filters and see all -entries again, press 'a', which removes all the filters. - -You can also sort the bibtex entries based on a field. To do this, press 's'. -This will present you with a prompt like in the case of the filter and you are -asked to choose a field. In this case, you would type in a single character. -This sorts the entries according to that field. - -NOTE: <F9> will also work in a similar way after any command which contains the - word cite in it. For example, pressing <F9> will also work with \citenum - etc. - - -The following logic is applied to find out which bibliographic entries are -included in the completion. - - -1. Firstly, if the present file has a master-file [|ls_a_ct|] defined for it, - then Latex-Suite will perform the following steps on that file instead of on - the current file. - -2. First, the file is scanned for a \bibliography command. To explain better, - assume that a command > - \bibliography{file1,file2} -< is found in the present file. For each bibliography file, say file1, - Latex-Suite first tries to see if a .bib file, file1.bib can be found. If so, - it will scan it for bib-keys of the form @BOOK{ etc., and add these searches - to the completion list. If a .bib file cannot be found, then it will try to - see if file1.bbl can be found. If so, Latex-Suite will search it for bib-keys - of the form \bibitem and add these to the completion list. - - You can set the location where Latex-Suite will search for .bib and .bbl - files using the |Tex_BIBINPUTS| [|ls_a_dr|] variable. - -3. If a \bibliography command is not found, then Latex-Suite tries to scan the - present file for a \begin{thebibliography} environment. If found, Latex-Suite - searches the present file for bib-keys of the form \bibitem. - -4. Finally, it will try to see if this file includes other files via the \input - command. For each such file found, Latex-Suite will repeat the previous two - steps stopping at the first file which has either a \bibliography command or - a thebibliography environment. - - -Caching the \cite completion results *ls_5_3_1* *ls_a_bV* - *cite-search-caching* - - *TClearCiteHist* *ls_a_ec* -Often times, the editing cycle proceeds by first laying out a comprehensive -bibliography and then completing all the \cite commands in one session. In such -situations, it is inefficient to scan the whole list of bibliography files for -bib-keys each time. Latex-Suite provides a way to cache the results of the cite -completion search using the Tex_RememberCiteSearch [|ls_a_du|] variable. If set, -Latex-Suite will perform the search only the first time <F9> is used. Next time -on, it will reuse the search results. If you wish to redo the search results, -issue the command > - TClearCiteHist -This will redo the completion list next time you use <F9>. - --------------------------------------------------------------------------------- -Latex-Suite filename completion *ls_5_4* *ls_a_bW* - *ls-filename-completion* - -When you press <F9> at a location where Latex-Suite guesses a filename needs to -be typed, then a new explorer window will open up with the list of files. You -can use this window to change directories etc. Pressing <enter> on a filename in -the explorer window will automatically close the explorer window, return to the -location where you pressed <F9> from and insert the filename into that position. - -Latex-Suite also tries to guess what kinds of files you might not want to insert -and hides those accordingly. For example, if you press <F9> when you are located -at \includegraphics{, then Latex-Suite knows that you will not want to insert -.tex files. Therefore, the explorer window will automatically hide these files. - -As of now, Latex-Suite recognizes the following commands for filename -completion. Along with the commands, this table also lists the files which -Latex-Suite will not show for completing each command. - -command hide pattern~ -\bibliography '^\.,\.[^b]..$' -\include \includeonly '^\.,\.[^t]..$' -\includegraphics \psfig '^\.,\.tex$,\.bib$,\.bbl$,\.zip$,\.gz$' -\input '' - --------------------------------------------------------------------------------- -Custom command completion *ls_5_5* *ls_a_bX* - *ls-completion-custom* - -Latex-Suite also recognizes certain commonly used LaTeX commands for the <F9> -key. At the moment, the \bibliographystyle, \addtocontents and the -\addcontentsline commands are recognized, although more will be added in the -future. When you press the <F9> after such a command, Latex-Suite will prompt -you with a list of arguments which make sense for the command. - -This functionality is available for commands for which a global variable of the -form g:Tex_completion_{<command>} is defined where <command> is the command -name. This variable is a comma separated list of values which this command -takes. For example, the argument to the \bibliographystyle command is commonly -one of abbr,alpha,plain,unsrt. Therefore, Latex-Suite defines > - let g:Tex_completion_bibliographystyle = 'abbr,alpha,plain,unsrt' -You can define your own completion variables in a similar manner for commands -which you might use. - -================================================================================ -LaTeX Compiling *ls_6* *ls_a_bY* - *latex-compiling* - -|ls_6_1| Setting Compilation rules -|ls_6_2| Handling dependencies in compilation -|ls_6_3| Compiling multiple times -|ls_6_4| Customizing the compiler output -|ls_6_5| Compiling parts of a file - - -This functionality, available via the TeX-Suite menu, provides various tools to -compile and debug LaTeX files from within Vim. - -If you are using commonly used LaTeX tools, then you should be all set as soon -as you download and install Latex-Suite. In order to compile a LaTeX file, -simply press \ll while editing the file. This runs latex on the current file and -displays the errors in a |quickfix-window| below the file being edited. You can -then scroll through the errors and press <enter> to be taken to the location of -the corresponding error. Along with the errors being listed in the quickfix -window, the corresponding log file is also opened in |preview| mode beneath the -quickfix window. It is scrolled automatically to keep in sync with the error -being viewed in the quickfix window. You will be automatically taken to the -location of the first error/warning unless you set the g:Tex_GotoError -[|ls_a_dD|] variable to 0. - -Latex-Suite also supports compiling LaTeX into formats other than DVI. By -default, Latex-Suite supports PDF and PS formats. In order to choose a format -other than DVI, use the TTarget command or the TeX-Suite > Target Format menu -item. This will ask you to type in the name of the target format you want to -compile to. If a rule has been defined for the format (as described in the next -section [|ls_a_bZ|]), then Latex-Suite will switch to that format. - -Trying to choose a format for which no rule has been defined will result in -Latex-Suite displaying a warning message without taking any action. - -If you are using a multiple file project and need to compile a master file while -editing other files, then Latex-Suite provides a way to specify the file to be -compiled as described in latex-master-file [|ls_a_ct|]. - - --------------------------------------------------------------------------------- -Setting Compilation rules *ls_6_1* *ls_a_bZ* - *compiler-rules* - -In order to compile LaTeX files into various formats, Latex-Suite needs to know -which external programs to call and in which way they need to be called. This -information is provided to Latex-Suite via a number of "rules". For each format -you want to compile to, you need to specify a rule. A rule is specified by -defining a variable of the form: > - g:Tex_CompileRule_<format> -where <format> is a string like "pdf", "dvi" etc. - -Example: By default, Latex-Suite uses the following rule for compiling LaTeX -documents into DVI. > - g:Tex_CompileRule_dvi = 'latex --interaction=nonstopmode $*' - - -Default values are also provided for ps and pdf formats. You might want to -change these rules in texrc according to your local tex environment. - -NOTE: For win32 users user MikTeX, sometimes the latex compiler's output has a - bug where a single number is split across different lines. In this case, - put the included vim-latex file distributed with Latex-Suite. - - - --------------------------------------------------------------------------------- -Handling dependencies in compilation *ls_6_2* *ls_a_ca* - *compiler-dependency* - -Latex-Suite also handles compiling dependencies automatically via certain rules -which specify the "dependency chain" for each target format. For example, if in -your case, you use > - .tex -> .dvi -> .ps -> .pdf -to generate pdf files from dvi files, then you will need to specify the -following setting in your Latex-Suite configuration (see customizing Latex-Suite -[|ls_a_cP|] for where these settings should go): > - - let g:Tex_FormatDependency_pdf = 'dvi,ps,pdf' - -This is a comma separated string of formats specifying the order in which the -formats to be compiled into should be chosen. With this setting, if you set the -target format to pdf, then the next time you compile via the \ll shortcut, -Latex-Suite will first generate a dvi file, then use that to generate the ps -file and finally create the pdf file from that. - -NOTE: If any of the intermediate formats is listed in the - g:Tex_MultipleCompileFormats setting as described in the section Compiling - multiple times [|ls_a_cb|], then Latex-Suite might make multiple calls to - the compiler to generate the output file of that format. - - -Along with the g:Tex_FormatDependency_{format} setting, you should ofcourse -specify the rule for compiling to each of the formats as described in the -previous section [|ls_a_bZ|]. For example, with the setting above, you could -use: > - - let g:Tex_CompileRule_dvi = 'latex --interaction=nonstopmode $*' - let g:Tex_CompileRule_ps = 'dvips -Ppdf -o $*.ps $*.dvi' - let g:Tex_CompileRule_pdf = 'ps2pdf $*.ps' - - -NOTE: By default, Latex-Suite does not specify any compiler dependencies. Each - target format for which a rule has been derived will be compiled - independently. - - - --------------------------------------------------------------------------------- -Compiling multiple times *ls_6_3* *ls_a_cb* - *compiling-multiple* - -Most LaTeX compilers need to be re-run several times in several commonly -occurring situations in order to get a final camera ready copy. For example, -when \label's change, when new \cite commands are added etc. If the target -format you are compiling to requires multiple compilations, then you will need -to include the format in the g:Tex_MultipleCompileFormats setting. This is a -comma separated string of formats which need multiple compilations to be -generated correctly. - -By default, this setting contains just the dvi format. If you use the pdflatex -compiler to generate pdf files, then you might want to also include pdf into the -above setting. - -For every format included in the g:Tex_MultipleCompileFormats setting described -above, Latex-Suite will use the following logic to generate the file. Note that -although the following description uses latex to refer to the compiler, it could -be some other compiler such as pdflatex for generating pdf output. - -1. If there was a .idx file, then remember its contents. - -2. Run latex. - -3. If the .idx file changed due to the latex compiler, then run makeindex to - redo the .ind file and then remember to rerun latex. - -4. If the .aux file generated by the latex compiler contains a \bibdata line, - then it means that we are using a .bib file. Therefore, run bibtex. - - NOTE: This means that we will always run bibtex whenever we use the - \bibliography command whether or not we actually need to. At this time, - Latex-Suite does not parse the .aux file before and after the latex - compiler to see if we are required to rerun bibtex. - -5. If the .bbl file changes because of this, then remember to rerun latex again. - -6. Also, we check to see if the LaTeX compiler gives certain standard warnings - which notify that we need to compile once again. In this case also, remember - to rerun LaTeX. - -7. If we found we had to rerun latex, then we repeat the steps above but not - running makeindex or bibtex again. - -The LaTeX file is compiled atmost 5 times using this logic. These steps will -ensure that on most platforms/environments, you will get a clean output with all -the cross-references, citations etc correctly labelled and ordered. - --------------------------------------------------------------------------------- -Customizing the compiler output *ls_6_4* *ls_a_cc* - *compiler-output-customization* - -Most LaTeX compilers produce a very large amount of output during compilation, -most of which is not relevant to debugging type-setting errors. The compiler -plugin provided with Latex-Suite (which is an enhanced version of the standard -compiler plugin maintained by Artem Chuprina), provides a way to filter the -compiler output so that the actual errors/warnings can be presented much more -concisely. - -The compiler plugin is set up by default to function in a "non-verbose", -"ignore-common-warnings" mode, which means that irrelevant lines from the -compiler output will be ignored and some very common warnings are also ignored. -Latex-Suite does this via the global variable g:Tex_IgnoredWarnings [|ls_a_dA|]. -This is a list of patterns, which can be used to filter out (or ignore) some or -the warnings and errors reported by the compiler. See the link above for its -default value. - -Latex-Suite uses the g:Tex_IgnoreLevel [|ls_a_dB|] setting to set a default -ignore level. For example, for the default value of 4, Latex-Suite ignores -warnings and errors matching the first 4 patterns in g:Tex_IgnoredWarnings. - -In addition to setting a default value of the ignore level, Latex-Suite provides -the ability to set the level dynamically, using the TCLevel command. For -example, if you issue the command: > - TCLevel 3 -from within Vim, then the next time you compile the document, Latex-Suite will -ignore warnings and errors which match the first three patterns in -g:Tex_IgnoredWarnings. - -When TCLevel is called with the unquoted string strict as follows: > - TClevel strict -then Latex-Suite switches to a "verbose", "no-lines-ignored" mode which is -useful when you want to make final checks of your document and want to be -careful not to let things slip by. - -See the explanation of the settings g:Tex_IgnoredWarnings [|ls_a_dA|] and -g:Tex_IgnoreLevel [|ls_a_dB|] to find out how to customize the filtering done by -Latex-Suite - --------------------------------------------------------------------------------- -Compiling parts of a file *ls_6_5* *ls_a_cd* - *part-compiling* - -Latex-Suite also provides a way to compile a fragment of a document. This can be -very useful while debugging a complex equation or one chapter in a book, etc. - -To do this, visually select a portion of the text and press \ll while in visual -mode. The visually selected portion will be saved to a temporary file with the -preamble from the current document prepended. Latex-Suite will then switch focus -to this temporary file and compile it. Continue to debug this file as required -and then replace the portion of the original file with this one. - -Pressing \lv while viewing the temporary file will view the output file -generated from the temporary file, not the original file - -Two commands |TPartComp| and |TPartView| are provided to be able to get this -functionality via the command line. - -From release 1.6 onwards of Latex-Suite, the temporary file created for part -compilation will reside in the same directory as the file from which the -fragment is being created. This ensures that any relative path-names defined in -the fragment will still work. Latex-Suite will attempt to clean the temporary -file(s) created when Vim exits. - -================================================================================ -Latex Viewing and Searching *ls_7* *ls_a_ce* - *latex-viewing* - -|ls_7_1| Setting Viewing rules -|ls_7_2| Forward Searching DVI documents -|ls_7_3| Inverse Searching - - - --------------------------------------------------------------------------------- -Setting Viewing rules *ls_7_1* *ls_a_cf* - *latex-viewing-rules* - -In order to view the output files created by compiling the source files, you -need to specify which external program Latex-Suite should call. You can specify -the external program using one of two settings Tex_ViewRule_format [|ls_a_dF|] -or Tex_ViewRuleComplete_format [|ls_a_dG|]. By default, Latex-Suite has default -settings for viewing various common output formats via the Tex_ViewRule_format -settings, so that if you are using commonly used programs, you should be all set -to view compiled files from within Vim by simply pressing \lv. - -NOTE: The viewing function also takes the *.latexmain [|ls_a_ct|] file into - account to decide which file to show. - - -If pressing \lv does not work, then it most probably has to do with incorrect -settings of the g:Tex_ViewRule_<format> [|ls_a_dF|] where <format> is the format -you are attempting to view. See the link above for how to set this according to -your system. - -In addition to viewing the files, Latex-Suite also supports forward and inverse -searching for certain common tools for viewing DVI documents. At the moment, -there is built-in support for YAP on windows (which ships with MikTeX), and the -popular xdvi on *nix platforms. See the next few sections for details on forward -and inverse searching. - --------------------------------------------------------------------------------- -Forward Searching DVI documents *ls_7_2* *ls_a_cg* - *forward-searching* - -Forward searching refers to making a DVI viewer display a given document at a -given location from within Vim. At present, this functionality is supported for -YAP on windows and xdvi on *nix machines. Pressing \ls from within Vim should -make the DVI viewer display the portion of the document where your cursor is -placed. - - *enabling-searching* *ls_a_ed* -NOTE: Enabling Forward and Inverse Searching - -------------------------------------- - Most DVI viewers need "source-special" information in order to do forward - (and inverse) searching. This information is embedded in the dvi file if - the LaTeX source is compiled with the --src-specials option. By default, - Latex-Suite does not supply this argument to the compiler. See the section - on to find out how this option can be set. - - - --------------------------------------------------------------------------------- -Inverse Searching *ls_7_3* *ls_a_ch* - *inverse-searching* - -Inverse searching refers to the DVI viewer telling Vim to display the LaTeX -source file at a given location when you double-click in the DVI viewer window. - -You will need to enable searching [|ls_a_ed|] in order to use this -functionality. - -You will also need to specify certain settings to the DVI viewer conveying the -syntax which it needs to use to tell Vim how to display the source file. In YAP, -you can set this option in View > Options > Inverse Search. The Command Line -field needs to be set as follows: > - "C:\Program Files\vim\vim61\gvim" -c ":RemoteOpen +%l %f" -The command :RemoteOpen is supplied when you install Latex-Suite. - -On *nix machines, Latex-Suite attempts to call the DVI viewer in such a way that -it already knows how to communicate with Vim. If this does not seem to be -working, you can use the RemoteOpen command described above. - -================================================================================ -Latex Folding *ls_8* *ls_a_ci* - *latex-folding* - -|ls_8_1| Default Folding Scheme in Latex-Suite -|ls_8_2| Customizing what to fold -|ls_8_3| Editing the folding.vim file directly - - -Latex-Suite ships with the plugin SyntaxFolds.vim which is a plugin for creating -"fake" syntax folds on the fly. The fold method is actually manual but the -folding is based on LaTeX syntax. This offers a speed increase over regular -syntax folding. Ofcourse it has the disadvantage that the folds are not dynamic, -i.e newly created syntax items are not automatically folded up. (This is a -compromise between speed and convenience). - -When you open up a LaTeX file, all the portions will be automatically folded up. -However, no new folds will be created until you press <F6> or \rf. (rf stands -for "refresh folds"). - -The fold-text is set to the first line of the folded text unless the fold is a -table, figure etc. (an environment). In this case, if a \caption and/or a label -is found in the folded region, then those are used to make a more meaningful -fold-text, otherwise the second line of the environment is displayed along with -the name of the environment. In other words, the following > - \begin{figure}[h] - \centerline{\psfig{figure=slidercrank.eps,height=6cm}} - \caption{The Slider Crank Mechanism.} - \label{fig:slidercrank} - \end{figure} - % a LaTeX comment. - \begin{eqnarray} - \sin(\pi) = 0 - \end{eqnarray} - - -will be shown as: > - +--- 5 lines: figure (fig:slidercrank) : The Slider Crank Mechanism. ----- - % a LaTeX comment. - +--- 3 lines: eqnarray () : \sin(\pi) = 0 -------------------------------- - - - --------------------------------------------------------------------------------- -Default Folding Scheme in Latex-Suite *ls_8_1* *ls_a_cj* - *default-folding* - -By default Latex-Suite creates folds in the following manner: - - > - \chapter - \section - %%fakesection - \subsection - \subsubsection - \item - \equation - \eqnarray - \figure - \table - \footnote -The indentation shows the "nestedness" of the folding scheme. See the next -section [|ls_a_ck|] to see how you can change this scheme. - --------------------------------------------------------------------------------- -Customizing what to fold *ls_8_2* *ls_a_ck* - *customizing-what-to-fold* - -From version 1.6 onwards, the folding in Latex-Suite can be controlled to a -large extent via a number of global variables. - - - -Tex_FoldedSections *ls_8_2_1* *ls_a_cl* - *Tex_FoldedSections* - -This entry defines which sections will be folded. This setting is a comma -separated list of section names. The default value is: > - part,chapter,section,%%fakesection, - subsection,subsubsection,paragraph -Each of the entries in the list will fold up a section of the corresponding -name. The %%fakesection section is provided as a means for the user to group -lines into "fake" sections. A %%fakesection is assumed to start on a line which -begins with the string %%fakesection and continue till the start of the next -\section, \subsection or any other section. - -See also advanced fold settings [|ls_a_cp|]. - - -Tex_FoldedEnvironments *ls_8_2_2* *ls_a_cm* - *Tex_FoldedEnvironments* - -This entry defines which environments will be folded. It is a comma separated -string of words each of which defines a single environment. The default setting -is > - verbatim,comment,eq,gather, - align,figure,table,thebibliography, - keywords,abstract,titlepage -The words need not be standard Latex environments. You can add any word you -like. Also, each word will fold up all environments whose name begins with that -word. For example, in the setting above, the word "eq" folds up the -\begin{equation}, \begin{eqnarray}, \begin{eqnarray*} environments. To avoid -this, you can replace the word "eq" with "eq}". - -See also advanced fold settings [|ls_a_cp|]. - - -Tex_FoldedCommands *ls_8_2_3* *ls_a_cn* - *Tex_FoldedCommands* - -This entry defines which commands will be folded. It is a comma separated string -of words each of which defines a single command. The default setting is empty, -i.e no commands are folded. The words need not be standard Latex commands. You -can use whatever words you like. Each word will fold all commands whose name -begins with that word as in the case of the Tex_FoldedEnvironments [|ls_a_cm|] -variable. - -NOTE: It is very difficult to fold commands reliably because it is very - difficult to create a regexp which will match a line containing unmatched - parentheses (or curly brackets), but will not match a line containing - matched parentheses. - - Just to make things safer, only lines which start a command but do not - contain additional curly braces after the command has started are folded. - In other words, if you wanted to fold the the command "mycommand", then - the lines > - \mycommand{This is a line - and some more text on the next line - } -< will be folded, but the lines > - \mycommand{This is a \textbf{line} - and some more text - } -< will not be folded. This is a bug which is very difficult to fix. - - -See also advanced fold settings [|ls_a_cp|]. - - -Tex_FoldedMisc *ls_8_2_4* *ls_a_co* - *Tex_FoldedMisc* - -This entry defines fold syntax for certain items which do not naturally fit into -the section, environment of command lists. It is a comma separated list of -words. The default value is: > - item,preamble,<<< -NOTE: Unlike the other Tex_FoldedXXXX variables, the words in this setting are - limited to take values from the following list: - - Value Meaning~ - comments Folds up contiguous blocks of comments - item Folds up the \items within list environments - preamble Folds up the preamble of a document. (The part between the - \documentclass command and the \begin{document} environment) - <<< Folds defined manually by the user using the <<< and >>> strings - as fold-markers. - - Any other words in the Tex_FoldedMisc setting are silently ignored. - - - -See also advanced fold settings [|ls_a_cp|]. - - -Advanced Fold setting details *ls_8_2_5* *ls_a_cp* - *fold-setting-advanced* - -The order of the words in the Tex_FoldedXXXX variables is _important_. The order -defines the order in which the folds are nested. For example, the value -"subsection,section" for the Tex_FoldedSections variable will not fold any -subsections at all. This is because the folds are created in the _reverse_ order -in which they occur in the Tex_FoldedSections setting and also, once a fold is -created, the interior of the fold is not examined for creating additional folds. -In the above case, this means that a \section is folded first and then its -interior is not examined further. The correct value should have been -"section,subsection" - - *fold-setting-adding* *ls_a_ee* -Each of the fold setting variables Tex_FoldedSections, Tex_FoldedEnvironments -etc., as explained previously is a comma separated string of variables. However, -to make it easier to _add_ to the default settings without having to repeat the -whole default setting again, Latex-Suite uses the following logic in forming the -complete setting string from the Tex_FoldedXXXX variables. If the variable -starts with a comma, then Tex_FoldedXXXX is added to the end of the default -string rather than replacing it. Similarly, if it ends with a comma, then it -will be prepended to the beginning of the default setting rather than replacing -it. - -For example, if Tex_FoldedEnvironments is set to the string "myenv", then only -an environment of the form \begin{myenv} will be folded. However, if the -Tex_FoldedEnvironments setting is ",myenv", then the \begin{myenv} environment -will be folded after all other environments in the default setting have been -folded. On the other hand if Tex_FoldedEnvironments is of the form "myenv,", the -\begin{myenv} environment will be folded before the rest of the environments in -the default setting. - --------------------------------------------------------------------------------- -Editing the folding.vim file directly *ls_8_3* *ls_a_cq* - *editing-folding* - -If you are using version 1.5 of Latex-Suite or older, you will need to directly -edit the $VIM/ftplugin/latex-suite/folding.vim file if you wish to modify the -folding scheme. You will need to modify the function MakeTexFolds() defined in -that file to modify the fold syntax. MakeTexFolds makes a number of calls to -AddSyntaxFoldItem. Each such call defines a new "fold item". The order in which -these calls are made defines how the folds are nested. For example, if you -desire an figure environment to be nested within a section, then you should -define the fold for the figure first. The syntax of AddSyntaxFoldItem is as -follows: > - AddSyntaxFoldItem(startpat, endpat, startoff, endoff [, startskip, endskip]) -If the last two arguments are omitted, then they are assumed to default to the -empty strings ''. The explanation for each argument is as follows: - -Argument Explanation~ -startpat a line matching this pattern defines the beginning of a fold. -endpat a line matching this pattern defines the end of a fold. -startoff this is the offset from the starting line at which folding will - actually start -endoff like startoff, but gives the offset of the actual fold end from the - line satisfying endpat. startoff and endoff are necessary when the - folding region does not have a specific end pattern corresponding to - a start pattern. for example in LaTeX, \section{Section Name} defines - the beginning of a section, but there is no command which - specifically ends a section. Thus a \section is assumed to end 1 line - _before_ another section starts. -startskip A Pattern Which Defines The Beginning Of A "Skipped" Region. - - For example, suppose we define a \itemize fold as follows: > - = '^\s*\\item', - = '^\s*\\item\|^\s*\\end{\(enumerate\|itemize\|description\)}', - = 0, - = -1 -< - - This defines a fold which starts with a line beginning with an \item - and ending one line before a line beginning with an \item or - \end{enumerate} etc. - - Then, as long as \item's are not nested things are fine. However, - once items begin to nest, the fold started by one \item can end - because of an \item in an \itemize environment within this \item. - i.e, the following can happen: > - \begin{itemize} - \item Some text <------- fold will start here - This item will contain a nested item - \begin{itemize} <----- fold will end here because next line contains \item... - \item Hello - \end{itemize} <----- ... instead of here. - \item Next item of the parent itemize - \end{itemize} -< - - Therefore, in order to completely define a folding item which allows - nesting, we need to also define a "skip" pattern. startskip and end - skip do that. Leave '' when there is no nesting. -endskip the pattern which defines the end of the "skip" pattern for nested - folds. - -NOTE: Example 1 - --------- - A syntax fold region for the latex section is defined with the following - arguments to AddSyntaxFoldItem: > - startpat = "\\section{" - endpat = "\\section{" - startoff = 0 - endoff = -1 - startskip = '' - endskip = '' -< Note that the start and end patterns are thus the same and endoff has a - negative value to capture the effect of a section ending one line before - the next starts. - - -NOTE: Example 2 - --------- - A syntax fold region for the \itemize environment is: > - startpat = '^\s*\\item', - endpat = '^\s*\\item\|^\s*\\end{\(enumerate\|itemize\|description\)}', - startoff = 0, - endoff = -1, - startskip = '^\s*\\begin{\(enumerate\|itemize\|description\)}', - endskip = '^\s*\\end{\(enumerate\|itemize\|description\)}' -< Note the use of startskip and endskip to allow nesting. - - - -================================================================================ -Multiple file LaTeX projects *ls_9* *ls_a_cr* - *latex-project* - -|ls_9_1| Latex-Suite project settings -|ls_9_2| Specifying which file to compile - - - *latex-project-example* *ls_a_ef* -Many LaTeX projects contain multiple source files which are \included from a -master file. A typical example of this situation is a directory layout such as -the following - - > - thesis/ - main.tex - abstract.tex - intro/ - intro.tex - figures/ - fig1.eps - fig2.eps - chapter1/ - chap1.tex - figures/ - fig1.eps - conclusion/ - conclusion.tex - figures/ - - -In the above case, main.tex will typically look like - - > - % file: main.tex - \documentclass{report} - \begin{document} - - \input{abstract.tex} - \input{intro/intro.tex} - \input{chapter1/chap1.tex} - \input{conclusion/conclusion.tex} - - \end{document} - - - *latex-master-file-specification* *ls_a_eg* -In such situations, you will need to convey to Latex-Suite that main.tex is the -main file which \inputs the other files. This is done by creating a file called -main.tex.latexmain in the same directory in which main.tex resides. This file is -called the _master file_ in this manual. See Tex_MainFileExpression [|ls_a_eh|] -for an alternative way of specifying the master file. - -NOTE: Here main.tex.latexmain is (obviously) a different file from main.tex - itself. main.tex need not be renamed. This ofcourse restricts each - directory to have a single master file. - - -Each time Latex-Suite opens a new LaTeX file, it will try to see if it is part -of a multiple file project by searching upwards (to the root of the file-system) -from the current file's directory to see if it finds a file of the form -*.latexmain. If such a file is found, then it is considered that the current -file is part of a larger project. The name of the LaTeX master file is inferred -directly from the first part of the *.latexmain file as described in the example -above. - - --------------------------------------------------------------------------------- -Latex-Suite project settings *ls_9_1* *ls_a_cs* - *latex-project-settings* - -If a master file [|ls_a_ct|] is found, then Latex-Suite :sources the file. Thus -this file needs to contain valid Vim commands. This file is typically used to -store project specific settings. - -Some typical per-project settings which are best put in the master file are -Tex_ProjectSourceFiles [|ls_a_dt|] - --------------------------------------------------------------------------------- -Specifying which file to compile *ls_9_2* *ls_a_ct* - *latex-master-file* - -In the example described previously [|ls_a_ef|], if you are editing -intro/intro.tex and press \ll, then you still want Latex-Suite to compile -main.tex, because intro/intro.tex is merely a fragment which is \input'ed into -main.tex. If the master file is already specified using the *.latexmain -convention described previously [|ls_a_ef|], then Latex-Suite will automatically -compile the master file when you are editing any of its \input'ed fragments. -Thus pressing \ll while editing intro/intro.tex will compile main.tex. - - *Tex_MainFileExpression* *ls_a_eh* -If you wish to use some different logic to specify the main file name, you can -specify a custom expression via the Tex_MainFileExpression variable. This is a -string containing a valid vim expression. In addition, you can use a variable -modifier which is in the format used for |filename-modifiers|, for example, -':p:h'. You should utilize this variable to modify the filename of the main -file. > - let g:Tex_MainFileExpression = 'MainFile(modifier)' - function! MainFile(fmod) - if glob('*.latexmain') != '' - return fnamemodify(glob('*.latexmain'), a:fmod) - else - return '' - endif - endif - - -================================================================================ -Latex-Suite Commands and Maps *ls_10* *ls_a_cu* - *latex-suite-commands-maps* - -|ls_10_1| Latex-Suite Maps -|ls_10_2| Latex Suite Commands - - -This section describes the maps and commands used in Latex-Suite. It also -describes a way to change the map sequences according to your preference. - - --------------------------------------------------------------------------------- -Latex-Suite Maps *ls_10_1* *ls_a_cv* - *latex-suite-maps* - - *remapping-latex-suite-keys* *ls_a_ei* -Most of the mappings used in Latex-Suite can be mapped to a different key -combination to suit your particular needs. An example best explains the -procedure for doing this. Suppose you want to remap the <C-j> key which -Latex-Suite (actually imaps.vim) uses to jump to the next placeholder. To do -this, you first need to find out which <Plug> mapping <C-j> is derived from. You -will need to look at the relevant section of this manual to do this. For -example, the section IMAP mappings [|ls_a_cw|] has the information that the -<C-j> key is derived from <Plug>IMAP_JumpForward. Therefore to remap the <C-j> -key to say <C-space>, you will need to put a statement like the following in -your ~/.vimrc. > - imap <C-space> <Plug>IMAP_JumpForward - - -NOTE: To change the IMAP mappings which affect jumping between placeholders, the - map statement above has to be placed in your ~/.vimrc. For other mappings - you can place the map statement in your $VIM/ftplugin/tex.vim file. The - reason for this is that the <C-j> maps are created in plugin/imaps.vim, - which is sourced as soon as Vim starts before sourcing any ftplugin files. - - - - -IMAP mappings *ls_10_1_1* *ls_a_cw* - *customize-imap-maps* - -These mappings are utilized for jumping between placeholders as described here -[|ls_a_eD|]. See the parent section [|ls_a_cv|] to find out how to use this -information to change the default maps. - - *Plug_IMAP_JumpForward* *ls_a_ej* - *Plug_IMAP_JumpBack* *ls_a_ek* - *Plug_IMAP_DeleteAndJumpForward* *ls_a_el* - *Plug_IMAP_DeleteAndJumBack* *ls_a_em* -Plug map Default Key~ -<Plug>IMAP_JumpForward <C-j> -<Plug>IMAP_JumpBack (none) -<Plug>IMAP_DeleteAndJumpForward (none) -<Plug>IMAP_DeleteAndJumpBack (none) - -<Plug>IMAP_JumpForward takes you to the location of the next place-holder -[|ls_a_eD|]. - -<Plug>IMAP_JumpBack takes you to the previous place-holder [|ls_a_eD|]. - -<Plug>IMAP_DeleteAndJumpForward deletes the presently selected place-holder and -jumps to the next place-holder irrespective of whether the present placeholder -is empty or not and ignoring the value of place-holder settings like -g:Imap_DeleteEmptyPlaceHolders [|ls_a_cW|] and g:Imap_StickyPlaceHolders -[|ls_a_cX|] - -<Plug>IMAP_DeleteAndJumpBack deletes the presently selected place-holder and -jumps to the previous place-holder irrespective of whether the present -placeholder is empty or not and ignoring the value of place-holder settings like -g:Imap_DeleteEmptyPlaceHolders [|ls_a_cW|] and g:Imap_StickyPlaceHolders -[|ls_a_cX|] - - -Alt-Key mappings *ls_10_1_2* *ls_a_cx* - *customize-alt-key-maps* - -These mappings are are described in the section Alt key macros [|ls_a_bA|]. See -the parent section [|ls_a_ei|] to see how to use the following information to -remap keys. - - *Plug_Tex_MathBF* *ls_a_en* - *Plug_Tex_MathCal* *ls_a_eo* - *Plug_Tex_LeftRight* *ls_a_ep* - *Plug_Tex_InsertItem* *ls_a_eq* -Plug Mapping Default Key~ -<Plug>Tex_MathBF <Alt-B> -<Plug>Tex_MathCal <Alt-C> -<Plug>Tex_LeftRight <Alt-L> -<Plug>Tex_InsertItem <Alt-I> - --------------------------------------------------------------------------------- -Latex Suite Commands *ls_10_2* *ls_a_cy* - *latex-suite-commands* - - - -:TMacro [{macro}] *ls_10_2_1* *ls_a_cz* *TMacro* - -When used without any arguments lists all available macros defined in runtime -ftplugin/latex-suite/macros/ directories and prompts you to choose one of them. -With one argument |:read| this macro under cursor position. With more than one -argument it will not work :) In Vim >= 6.2 works completion of names of macros -(see 'wildmenu', 'wildmode' for more about command-line completion). - - -:TMacroEdit [{macro}] *ls_10_2_2* *ls_a_cA* - *TMacroEdit* - -Splits window for editing {macro}. When used without any arguments lists all -available macros defined in runtime ftplugin/latex-suite/macros/ directories and -prompt you to choose one of them. When you try to edit {macro} not from local -directory Latex-Suite will copy it to your local directory with suffix "-local". -If local copy already exists Latex-Suite prompt for overwriting it. In Vim >= -6.2 works completion of names of macros (see 'wildmenu', 'wildmode' for more -about command-line completion). - - -:TMacroNew *ls_10_2_3* *ls_a_cB* - *TMacroNew* - -Splits window to write new macro. Directory in new buffer is locally changed to -Latex-Suite/macros/. - - -:TMacroDelete [{macro}] *ls_10_2_4* *ls_a_cC* - *TMacroDelete* - -Delets {macro} from your local ftplugin/latex-suite/macros/ directory. When used -without any arguments lists all available macros defined in Latex-Suite/macros/ -directory and prompt you to choose one of them. When you choose to delete -{macro} which is not in your local directory Latex-Suite will refuse to delete -it. In Vim >= 6.2 works completion of names of macros (see 'wildmenu', -'wildmode' for more about command-line completion) - - -:TPackage [{package, ...}] *ls_10_2_5* *ls_a_cD* - *TPackage* - -When used without any arguments lists name of the packages for which support is -available. If you are using Vim GUI and have Tex_Menus set to 1, then it will -list all files found in the $VIM/ftplugin/latex-suite/packages directory. -Otherwise, Latex-Suite will list files found in the -$VIM/ftplugin/latex-suite/dictionaries directory. Choosing a file from the list -will insert a > - \usepackage[<++>]{<packname>} -line into the buffer at the current cursor location. For Vim 6.2 and above, you -can use command-line completion to choose a package file. You can also call -TPackage with one or more package names separated with spaces in which case, -Latex-Suite will insert \usepackage lines for each of them in turn. - -After inserting the \usepackage line(s), Latex-Suite will support it (them) in -various ways as described in the section Actions taken for supported packages -[|ls_a_bL|]. - - -:TPackageUpdate *ls_10_2_6* *ls_a_cE* - *TPackageUpdate* - -This command `reads' name of package under cursor and turns on possible support. - - -:TPackageUpdateAll *ls_10_2_7* *ls_a_cF* - *TPackageUpdateAll* - -After issuing this command latexSuite scans the file in looking for not declared -packages, removing not needed entries from Packages menu and turning off not -necessary packages' dictionaries. - - -:TTemplate [{template}] *ls_10_2_8* *ls_a_cG* - *TTemplate* - -When used without any arguments lists all available templates from -latex-suite/templates/ directory and prompts to choose one of them. With one -argument :0|read| {template} file. With more than one argument it will not work -:) In Vim >= 6.2 works completion of names of macros (see 'wildmenu', 'wildmode' -for more about command-line completion) - - -:TSection [{argument}] *ls_10_2_9* *ls_a_cH* - *TSection* - -Used without any arguments inserts last section type (|latex-sectioning|). -Accepts arguments: n> inserts section name in <n> logical level. Levels are: -0 part -1 chapter -2 section -3 subsection -4 subsubsection -5 paragraph -6 subparagraph - - -+<n> inserts section name <n> logical levels above the last used comand --<n> inserts section name <n> logical levels below the last used comand -+ inserts section name one logical level below the last used command (equal - to +1). -++ inserts section name two logical levels below the last used command (equal - to +2). -- inserts section name one logical level over the last used command (equal - to -1). --- inserts section name two logical levels over the last used command (equal - to -2). - - - -Command accepts also latexSuite mappings (|latex-macros|) without preceding S -and in lowercase: > - :TSection pa -will result in \part{}. It is possible to use full names of sections: :TSection -part - - -:TSectionAdvanced *ls_10_2_10* *ls_a_cI* - *TSectionAdvanced* - -Accepts the same arguments as |TSection| but leads to a couple of questions -(whether you want to include the section in the table of contents, whether there -is a shorter name for the table of contents) and then creates a more intelligent -template. - - -:TLook *ls_10_2_11* *ls_a_cJ* *TLook* - -Accepts one argument. Will look through .tex files in directory of edited file -for argument. It can be regexp. You don't have to enclose argument in "". <cr> -takes you to location. Other keys work as described in |latex-viewer|. Note: -TLook uses :grep command and is using 'grepprg'. Its regular expressions can be -different from those of Vim. - - -:TLookBib *ls_10_2_12* *ls_a_cK* - *TLookBib* - -Accepts one argument. Will look through .bib files in directory of edited file -for argument. It can be regexp. You don't have to enclose argument in "". <cr> -takes you to location. Other keys work as described in |latex-viewer|. - -NOTE: TLookBib uses :grep command and is using 'grepprg'. Its regular - expressions can be different from those of Vim. - - - - -:TLookAll *ls_10_2_13* *ls_a_cL* - *TLookAll* - -Accepts one argument. Will look through all files in directory of edited file -for argument. It can be regexp. You don't have to enclose argument in "". <cr> -takes you to location. Other keys work as described in |latex-viewer|. Note: -TLook uses :grep command and is using 'grepprg'. Its regular expressions can be -different from those of Vim. - - -:TPartComp *ls_10_2_14* *ls_a_cM* - *TPartComp* - -No argument allowed but accepts range in all formats. Define fragment of -interest with :'a,'b, :/a/,/b/, :'<,'> or :20,30. All other rules of compilation -apply. - - -:TPartView *ls_10_2_15* *ls_a_cN* - *TPartView* - -Show last compiled fragment. All rules of viewing apply but |latex-searching|. - - -:Tshortcuts [{arg}] *ls_10_2_16* *ls_a_cO* - *Tshortcuts* - -Show shortcuts in terminal (not using menu). Without {arg} you will see simple -menu prompting for one of them. Possible arguments: -g General shortcuts -e Environment shortcuts -f Font shortcuts -s Section shortcuts -m Math shortcuts -a All shortcuts - -================================================================================ -Customizing Latex-Suite *ls_11* *ls_a_cP* - *customizing-latex-suite* - -|ls_11_1| General Settings -|ls_11_2| Place-Holder Customization -|ls_11_3| Macro Customization -|ls_11_4| Smart Key Customization -|ls_11_5| Latex Completion Customization -|ls_11_6| Compiler Customization -|ls_11_7| Viewer Customization -|ls_11_8| Menu Customization -|ls_11_9| Folding Customization -|ls_11_10| Package Handling Customization - - -Customizing Latex-Suite is done by defining certain global variables in -$VIM/ftplugin/tex.vim, where $VIM corresponds to ~/.vim for *nix machines and -~/vimfiles for windows machines. This file is not part of the Latex-Suite -distribution. You will need to create this file yourself (or modify it if it -exists) if you need to change any default settings. Since this file is not -included as part of the Latex-Suite distribution, it will not be over-written in -subsequent updates. - -The default settings in Latex-Suite are defined in -$VIM/ftplugin/latex-suite/texrc. Please take a look at this file if you find -this documentation incomplete or confusing. That file is also well documented. - -This chapter describes the various settings which effect Latex-Suite and their -default values. The settings are broken up into sections according to the -behavior which they influence. - - --------------------------------------------------------------------------------- -General Settings *ls_11_1* *ls_a_cQ* - *ls-general-purpose-settings* - - - -Tex_Debug *ls_11_1_1* *ls_a_cR* - *Tex_Debug* - -Type boolean -Default Value 0 - -If set to 1, then Latex-Suite will create certain global debug statements which -can be printed by doing > - :call Tex_PrintDebug() - - - -Tex_UsePython *ls_11_1_2* *ls_a_cS* - *Tex_UsePython* - -Type boolean -Default Value 1 - -If Latex-Suite detects that your vim is python enabled (using has('python')), -then it tries to use python in certain places to speed things up. If this -misbehaves, you can set this to zero, in which case, Latex-Suite will use -vimscript to accomplish the same. - --------------------------------------------------------------------------------- -Place-Holder Customization *ls_11_2* *ls_a_cT* - *customizing-place-holders* - -Latex-Suite uses place-holders [|ls_a_eD|] to minimize using the movement keys -while typing. The following settings affect how place-holders are used. - -NOTE: These setting need to be set in your ~/.vimrc, not $VIM/ftplugin/tex.vim - because these settings affect the behavior of imaps.vim, which is a global - plugin, not a file-type plugin. - - - - -g:Imap_UsePlaceHolders *ls_11_2_1* *ls_a_cU* - *Imap_UsePlaceHolders* - - -Type Boolean -Default Value 1 - -Setting this to zero completely disables using place-holders. - - -g:Imap_PlaceHolderStart & g:Imap_PlaceHolderEnd *ls_11_2_2* *ls_a_cV* - *Imap_PlaceHolderStart* - - *Imap_PlaceHolderEnd* *ls_a_er* -Setting Type Value~ -Imap_PlaceHolderStart String '<+' -Imap_PlaceHolderEnd String '+>' - -These settings affect the strings displayed at the beginning and end of the -place-holder string. Set these strings to a value different than a commonly -occurring sequence of characters. - -NOTE: TIP - --- - If you use the latin1 encoding and do not type in french, then you can set - these strings to the \xab and \xbb characters (the french quotation - marks). - - - - -g:Imap_DeleteEmptyPlaceHolders *ls_11_2_3* *ls_a_cW* - *Imap_DeleteEmptyPlaceHolders* - - -Type Boolean -Default Value 1 - -When set to one, non-descriptive or empty place-holders are deleted on pressing -<Ctrl-J>. - - -g:Imap_StickyPlaceHolders *ls_11_2_4* *ls_a_cX* - *Imap_StickyPlaceHolders* - - -Type Boolean -Default Value 1 - -When set to 1, in visual mode, <Ctrl-J> takes you to the next placeholder -without deleting the current placeholder. - --------------------------------------------------------------------------------- -Macro Customization *ls_11_3* *ls_a_cY* - *customizing-macros* - - - -Tex_Env_name *ls_11_3_1* *ls_a_cZ* - *Tex_Env_name* - -If you wish to wish to expand certain environments differently from the way -Latex-Suite does it, you can define custom expansions using global variables of -the form Tex_Env_{name} where name corresponds to the environment. - -For example, if you press <F5> after typing theorem, Latex-Suite will by default -expand it to > - \begin{theorem} - \label{<++>}<++> - \end{theorem}<++> -However, if you wish change this to > - \begin{theorem} - <++> - \end{theorem}<++> -then define the following variable > - let g:Tex_Env_theorem = "\\begin{theorem}\<CR><++>\<CR>\\end{theorem}" -< - -If the expansion uses special keys such as carriage return etc, then use -double-quotes and use the "\<key>" notation for special keys. Backslashes have -to be doubled. - -You could even use strings returned by functions as the expansion by using the -IMAP_PutTextWithMovement() [|ls_a_ea|] function. - -If the name of the environment contains special characters (for example, the -eqnarray* environment), then use the following form: > - let g:Tex_Env_{'eqnarray*'} = - \ "\\begin{eqnarray*}\<CR><++> &=& <++>\<CR>\\end{eqnarray*}<++>" -This will make pressing <F5> after eqnarray* expand to > - \begin{eqnarray*} - <++> &=& <++> - \end{eqnarray*}<++> - - - -Tex_Com_name *ls_11_3_2* *ls_a_da* - *Tex_Com_name* - -If you wish to define new expansions for fast command insertion as described -here [|ls_a_bo|], or redefine expansions from the default values in Latex-Suite, -you will need to define variables of the form g:Tex_Com_{name} where name is a -command name. For example, with the setting > - let g:Tex_Com_frac = "\\frac{<++>}{<++>}<++>" -pressing <F7> after typing frac will change it to \frac{<++>}{<++>}<++> - -See Tex_Env_name [|ls_a_cZ|] for additional details on how to create this -setting in various special circumstances. - - -Enabling / disabling macros *ls_11_3_3* *ls_a_db* - *macro-enabling* - -The following variables disable various parts of the macro functionality of -Latex-Suite. See the links to the relevant sections to see what functionality -setting each of the variables to zero will take away. - - *Tex_EnvironmentMaps* *ls_a_es* - *Tex_EnvironmentMenus* *ls_a_et* - *Tex_FontMaps* *ls_a_eu* - *Tex_FontMenus* *ls_a_ev* - *Tex_SectionMaps* *ls_a_ew* - *Tex_SectionMenus* *ls_a_ex* -Setting Link to relevant section Default Value~ -g:Tex_EnvironmentMaps Environment Mappings [|ls_a_bf|] 1 -g:Tex_EnvironmentMenus 1 -g:Tex_FontMaps Font Mappings [|ls_a_bs|] 1 -g:Tex_FontMenus 1 -g:Tex_SectionMaps Section Mappings [|ls_a_bt|] 1 -g:Tex_SectionMenus 1 - - -g:Tex_UseMenuWizard *ls_11_3_4* *ls_a_dc* - *Tex_UseMenuWizard* - - -Type Boolean -Default Value 0 - -If this variable is set to 1, then when an environment is chosen from the menu -then for selected environments, Latex-Suite asks a series of questions on the -command line and inserts a template with the corresponding fields already filled -in. Setting this to zero will insert a template with place-holders [|ls_a_eD|] -marking off the places where fields need to be filled. - - -g:Imap_FreezeImap *ls_11_3_5* *ls_a_dd* - *Imap_FreezeImap* - -Type boolean -Default Value 0 - -This option when set to 1, temporarily freezes Latex-Suite's macro expansion. It -might be useful when you are using some other keymap which is causing excessive -macro expansion. Use a buffer-local variable of the same name if you wish to -affect just the present buffer. - - -g:Tex_CatchVisMapErrors *ls_11_3_6* *ls_a_de* - *Tex_CatchVisMapErrors* - - -Type Boolean -Default Value 1 - -With so many visual maps, its helpful to have a way of catching typing errors -made in visual mode. What this does is to prompt you to correct your visual mode -mapping if you start out with and then type some illegal keys. It basically maps -just the g:Tex_Leader character to a function. - - -g:Tex_Diacritics *ls_11_3_7* *ls_a_df* - *Tex_Diacritics* - - -Type Boolean -Default Value 0 - -Whether or not you want to use diacritics [|ls_a_bw|]. - - -g:Tex_Leader *ls_11_3_8* *ls_a_dg* - *Tex_Leader* - - -Type String -Default Value '`' - -The mappings in Latex-Suite are by default prefixed with the back-tick -character. For example, `/ inserts \frac{<++>}{<++>}<++> etc. You can change the -prefix with the following setting. ',', '/', '`' are preferred values. '' or '\' -will lead to a _lot_ of trouble. - -g:Tex_Leader is also used for visual mode mappings for fonts. - - -g:Tex_Leader2 *ls_11_3_9* *ls_a_dh* - *Tex_Leader2* - - -Type String -Default Value ',' - -In order to avoid clashes between the large number of visual mode macros -provided, the visual mode macros for environments [|ls_a_bm|] and sections start -with a character different from g:Tex_Leader. - - -g:Tex_PromptedEnvironments *ls_11_3_10* *ls_a_di* - *Tex_PromptedEnvironments* - - -Type String -Default Value 'eqnarray*,eqnarray,equation,equation*,\[,$$,align,align*' - -This string represents a comma separated list of fields corresponding to -environments. Pressing <F5> in insert-mode in the body of the document asks you -to choose from one of these environments to insert. - -Leaving this string empty will leave the <F5> key unmapped - - -g:Tex_HotKeyMappings *ls_11_3_11* *ls_a_dj* - *Tex_HotKeyMappings* - - -Type String -Default Value 'eqnarray*,eqnarray,bmatrix' - -This string represents a comma separated list of environments which are mapped -to <Shift-F-1> through <Shift-F-4>. For example, pressing <Shift-F-2> with this -setting inserts the eqnarray environment. - -Leaving this string empty will leave <Shift-F-1> through <Shift-F-4> unmapped. - -NOTE: Only the first four fields of this list are used. The rest are silently - ignored. - - - - -g:Tex_PromptedCommands *ls_11_3_12* *ls_a_dk* - *Tex_PromptedCommands* - - -Type String -Default Value 'footnote,cite,pageref,label' - -This string represents a comma separated list of LaTeX commands which -Latex-Suite uses for the <F7> and <S-F7> maps as described here [|ls_a_bo|]. - -Leaving this string empty will leave the <F7> key unmapped. - - -Tex_ItemStyle_environment *ls_11_3_13* *ls_a_dl* - *Tex_ItemStyle_environment* - -This setting affects the style which Latex-Suite uses to insert an \item when -<Alt-I> is pressed as described here [|ls_a_bE|]. By default Latex-Suite defines -styles for the following environments: - -Environment Style~ -itemize \item -enumerate \item -theindex \item -thebibliography \item[<+biblabel+>]{<+bibkey+>} <++> -description \item[<+label+>] <++> - -Each style is defined by a variable of the form g:Tex_ItemStyle_{envname} where -envname is the name of the environment for which the style is defined. For -example, by default > - g:Tex_ItemStyle_description = '\item[<+label+>] <++>' -Redefining the style for a particular environment or defining a style for an -entirely new environment is simply a matter of setting the value of a variable -of the corresponding name. - --------------------------------------------------------------------------------- -Smart Key Customization *ls_11_4* *ls_a_dm* - *customizing-smart-keys* - -These settings affect the smart key functionality as described here [|ls_a_bz|]. - - - -g:Tex_SmartKeyBS *ls_11_4_1* *ls_a_dn* - *Tex_SmartKeyBS* - - -Type Boolean -Default Value 1 - -Whether or not <Backspace> deletes diacritics. - - -g:Tex_SmartKeyQuote *ls_11_4_2* *ls_a_do* - *Tex_SmartKeyQuote* - - -Type Boolean -Default Value 1 - -Whether or not the smart quotes [|ls_a_bz|] functionality is available. - -If enabled, the quote characters can be customized by setting the following -variables: - -Setting Value~ -g:Tex_SmartQuoteOpen "``" -g:Tex_SmartQuoteClose "''" - -Non-English users will want to change these settings to their locale. These -global variables will be ignored if there are buffer-local variables (with the -same name), which may be set in the language specific package files, such as -$VIM/ftplugin/latex-suite/packages/german. - --------------------------------------------------------------------------------- -Latex Completion Customization *ls_11_5* *ls_a_dp* - *customizing-latex-completion* - -The following settings affect the completion [|ls_a_bR|] functionality in -Latex-Suite. - - - -Window size settings *ls_11_5_1* *ls_a_dq* - *completion-window-preferences* - -These three settings affect the aesthetics of the completion functionality. - - *Tex_ViewerCwindowHeight* *ls_a_ey* - *Tex_ViewerPreviewHeight* *ls_a_ez* - *Tex_ExplorerHeight* *ls_a_eA* - *Tex_ImageDir* *ls_a_eB* -Setting Explanation Default Value~ -g:Tex_ViewerCwindowHeight The height of the cwindow which 5 - displays the list of \labels - etc. -g:Tex_ViewerPreviewHeight The height of the preview window 10 - which shows the context of a - \label etc. -g:Tex_ExplorerHeight The height of the explorer 10 - window which lists the files - from which to choose an image - file. -g:Tex_ImageDir The directory to scan for images '' - - -g:Tex_BIBINPUTS *ls_11_5_2* *ls_a_dr* - *Tex_BIBINPUTS* - - -Type string -Default Value '' - -This string describes the directories which are scanned while trying to search -for .bib and .bbl files. See the cite completion section [|ls_a_bU|] for more -details. - -This string should be set in the syntax accepted by Vim's native 'path' setting. -Do not include the present directory '.'. While searching for bibliography -files, the present directory will be prepended to this variable. - - -Tex_UseSimpleLabelSearch *ls_11_5_3* *ls_a_ds* - *Tex_UseSimpleLabelSearch* - -When set to 1, Latex-Suite searches for \labels in all .tex files in the -directory containing the file being edited when <F9> is pressed. See \ref -completion [|ls_a_bT|] for details. - - -g:Tex_ProjectSourceFiles *ls_11_5_4* *ls_a_dt* - *Tex_ProjectSourceFiles* - - -Type String -Default Value '' - -This setting is meant to be initialized on a per-project basis using the -Latex-Suite master file [|ls_a_ct|] as described in Latex-Suite Project -[|ls_a_cr|] section. It is a list of source files which are used in the project. -If defined, then instead of using the logic described in -Tex_UseSimpleLabelSearch [|ls_a_ds|] to search for files in which to search for -\labels, we simply search for \labels in this list. This significantly reduces -the time it takes to generate the list of possible completions for large -projects. - -The list is specified as a whitespace separated list of filenames relative to -the location of the main file. - - -g:Tex_RememberCiteSearch *ls_11_5_5* *ls_a_du* - *Tex_RememberCiteSearch* - - -Type Boolean -Default Value 0 - -When this variable is non-zero, then Latex-Suite will try to remember results -from the \cite completion as described in this section [|ls_a_bV|]. - --------------------------------------------------------------------------------- -Compiler Customization *ls_11_6* *ls_a_dv* - *customizing-compiling* - -The following settings affect Latex-Suite's compilation functionality - - - -g:Tex_DefaultTargetFormat *ls_11_6_1* *ls_a_dw* - *Tex_DefaultTargetFormat* - - -Type String -Default Value dvi for windows/*nix and pdf for mac - -Use this setting to choose the default target format. For example, setting this -to pdf makes Latex-Suite compile a pdf file when you press \ll and fire up the -pdf viewer on pressing \lv. Make sure that a rules for compiling and viewing -have been defined for this target format as described here [|ls_a_dx|] and here -[|ls_a_dF|]. - - -g:Tex_CompileRule_<format> *ls_11_6_2* *ls_a_dx* - *Tex_CompileRule_format* - -Here <format> refers to the target format for which this rule is defined. -Latex-Suite supports compiling into dvi, ps and pdf by default. All these rules -are strings defined by default as follows: - - -g:Tex_CompileRule_dvi 'latex -interaction=nonstopmode $*' -g:Tex_CompileRule_ps 'ps2pdf $*' -g:Tex_CompileRule_pdf 'pdflatex -interaction=nonstopmode $*' - -If you desire forward and inverse searching via Latex-Suite, you will need to -change g:Tex_CompileRule_dvi to include -src-specials. However, this has been -known to cause problems with the output file. Therefore, use this with care. - - -g:Tex_FormatDependency_<format> *ls_11_6_3* *ls_a_dy* - -Type string -Default Value '' - -By default, there are no format dependencies defined. Each definition is of the -form above where <format> is a string such as 'dvi' etc. - -The value of each string is a comma separated string such as 'dvi,ps'. See the -Compiler dependency [|ls_a_ca|] section to see how to use/specify this setting - - -g:Tex_MultipleCompileFormats *ls_11_6_4* *ls_a_dz* - *Tex_MultipleCompileFormats* - -Type string -Default Value 'dvi' - -This is a comma separated string of formats for which the compiler needs to be -called multiple times in order to get cross-references, citations etc right. See -the Compiling multiple times [|ls_a_cb|] section for details. - - -g:Tex_IgnoredWarnings *ls_11_6_5* *ls_a_dA* - *Tex_IgnoredWarnings* - - -Type String -Default Value a new-line separated list of patterns as described below - -The default value of this setting is > - \"Underfull\n". - \"Overfull\n". - \"specifier changed to\n". - \"You have requested\n". - \"Missing number, treated as zero.\n". - \"There were undefined references\n" - \"Citation %.%# undefined" -This setting defines a set of patterns which will be filtered out when -displaying the output from the latex compiler. This is to aid in filtering out -very common warnings/errors. - -NOTE: Remember to check the value of g:Tex_IgnoreLevel [|ls_a_dB|] when you - change this setting. For example, if you append a new pattern which you - would like to ignore by default, increase the value of g:Tex_IgnoreLevel. - - - - -g:Tex_IgnoreLevel *ls_11_6_6* *ls_a_dB* - *Tex_IgnoreLevel* - - -Type Integer -Default Value 7 - -This setting defines a "filter level" or an "ignore level". A value of 7 for -instance means that any warning/error matching with any of the first 7 fields of -g:Tex_IgnoredWarnings [|ls_a_dA|] will be ignored. Setting this value to zero -will mean that no error/warning is ignored. However, even with a value of zero, -Latex-Suite will filter out most of the text which a LaTeX compiler typically -produces. Use > - TCLevel strict -from within Vim in order to see all the lines from the compiler's output. - - -Tex_UseMakefile *ls_11_6_7* *ls_a_dC* - *Tex_UseMakefile* - -Type boolean -Default Value 1 - -When set to 1, then if a makefile or Makefile is present in the current -directory, then Latex-Suite sets the makeprg option to just "make <target>", -where <target> is the target format chosen using the TCTarget or TTarget -commands. - -When set to 0, then Latex-Suite will set the makeprg setting to whatever is -defined by the g:Tex_CompileRule_target [|ls_a_dx|] setting. - - -g:Tex_GotoError *ls_11_6_8* *ls_a_dD* - *Tex_GotoError* - - -Type boolean -Default Value 1 - -If set to 1, then pressing \ll will take you to the location of the first -warning/error, otherwise you will remain in the original location but the -errors/warnings will be listed in the preview window. - --------------------------------------------------------------------------------- -Viewer Customization *ls_11_7* *ls_a_dE* - *customizing-viewing* - -The following settings affect how Latex-Suite will display compiled files. - - - -g:Tex_ViewRule_<format> *ls_11_7_1* *ls_a_dF* - *Tex_ViewRule_format* - -Here <format> refers to a format such as dvi, ps, etc. This variable defines the -program which will be called to display a file of that format. - -By default, Latex-Suite defines viewer programs for viewing DVI, PS and PDF -formats as follows: - - Windows Unix~ -g:Tex_ViewRule_dvi 'yap -1' 'xdvi' -g:Tex_ViewRule_ps 'gsview32' 'ghostview' -g:Tex_ViewRule_pdf 'AcroRd32' 'xpdf' - -For Macintosh systems, these strings are left empty by default. This lets the -system pick the program for each format. If you define these variables for Mac, -the system choice will be over-ridden. - -Latex-Suite appends file.format to the above settings while calling the external -programs. For example, with > - let g:Tex_ViewRule_dvi = 'yap -1' -yap is called as > - !start yap -1 file.dvi -from within Vim. (The initial start is used on Windows platforms is to make yap -start as a separate process.) If you find the way Latex-Suite constructs the -command line too restrictive, you can use the Tex_ViewRuleComplete_format -[|ls_a_dG|] setting for more complete control on how the command line is -constructed while calling the external program for viewing. - -NOTE: For windows, you will need to set the $PATH variable to include the paths - to yap, AcroRd32, gsview32 and any other programs. See your system - documentation for how to do this. - - -NOTE: Default Viewing Format - ---------------------- - To change the default format for viewing files, set the - g:Tex_DefaultTargetFormat [|ls_a_dw|] variable. - - - - -Tex_ViewRuleComplete_<format> *ls_11_7_2* *ls_a_dG* - *Tex_ViewRuleComplete_format* - -Here <format> refers to the extension of a output format such as dvi, html etc. - -Tex_ViewRuleComplete_format takes precedence over Tex_ViewRule_format if both -are specified. By default, Latex-Suite does not define values for -Tex_ViewRuleComplete_format for any format. Unlike in the case of -Tex_ViewRule_format, Latex-Suite does not modify Tex_ViewRuleComplete_format at -all in constructing the command line. The only modification is to substitute -'$*' everywhere in the string with the name of the file being viewed (without -the extension). - -NOTE: IMPORTANT - --------- - Make sure you make the process go into the background otherwise vim will - wait for the viewer to terminate before letting you edit the file again. - - To make a process go into the background on a *nix platform, use a - trailing & in the setting. On Windows, use start at the beginning of the - setting. Example: Suppose you have a latex->html converter which converts - a file say foo.tex to a file foo/index.html. Then you would use: > - " On *nix platform - let g:Tex_ViewRuleComplete_html = 'MozillaFirebird $*/index.html &' - " On windows platform - let g:Tex_ViewRuleComplete_html = 'start MozillaFirebird $*/index.html' -< - - - --------------------------------------------------------------------------------- -Menu Customization *ls_11_8* *ls_a_dH* - *customizing-menus* - -In addition to using the variables defined in this section to affect the -menu-layout permanently (i.e, the layout Latex-Suite will start with), you can -also use the TeX-Suite > Configure Menu menu to dynamically configure the menu -layout after Latex-Suite has started. - - - -g:Tex_Menus *ls_11_8_1* *ls_a_dI* - *Tex_Menus* - - -Type Boolean -Default Value 1 - -If set to 0, Latex-Suite will suppress showing all menus. Useful if you mostly -work in terminals. - - -g:Tex_MainMenuLocation *ls_11_8_2* *ls_a_dJ* - *Tex_MainMenuLocation* - - -Type number -Default Value 80 - -This setting decides the location of the first top-level Latex-Suite menu. You -can for example shift all the menus created by Latex-Suite to the very end by -setting this value to a large number like 990. - - -g:Tex_MathMenus *ls_11_8_3* *ls_a_dK* - *Tex_MathMenus* - - -Type Boolean -Default Value 1 - -The Tex-Math menu consists of hundreds of mathematical symbols used in LaTeX. -This menu comprises about 75% of the menus. - - -g:Tex_NestElementMenus *ls_11_8_4* *ls_a_dL* - *Tex_NestElementMenus* - - -Type Boolean -Default Value 1 - -This setting controls the "compactness" of the menus. If set to 1, then the -Font, Counter and Dimensioning menus are collected together in a single menu -called Tex-Elements, otherwise, they will each get a separate menu. - - -g:Tex_PackagesMenu *ls_11_8_5* *ls_a_dM* - *Tex_PackagesMenu* - - -Type Boolean -Default Value 1 - -Setting this to zero will stop Latex-Suite from automatically creating the -TeX-Suite > Packages > Supported menu at startup. You can still create the menu -after startup by going to TeX-Suite > Configure Menu. - - -g:Tex_NestPackagesMenu *ls_11_8_6* *ls_a_dN* - *Tex_NestPackagesMenu* - - -Type String -Default Value 'TeX-' - -This string is the prefix added to all the menus created by Latex-Suite. If you -define this variable with a dot ('.') as the last character, then all the menus -created by Latex-Suite will be nested under a single master menu. For example, -set this to '&LaTeX-Suite.' to nest all menus under a menu called &LaTeX-Suite. - - -g:Tex_UseUtfMenus *ls_11_8_7* *ls_a_dO* - *Tex_UseUtfMenus* - - -Type Boolean -Default Value 0 - -This setting controls whether Latex-Suite uses utf-8 symbols to display some of -the mathematical symbols in the TeX-Math menu. It is necessary for your -system/GUI to support utf-8. Setting this to 1 has the side-effect of setting -the 'encoding' option of Vim to 'utf-8'. - --------------------------------------------------------------------------------- -Folding Customization *ls_11_9* *ls_a_dP* - *customizing-folding* - -The following settings control the folding [|ls_a_ci|] functionality of -Latex-Suite. - - - -g:Tex_Folding *ls_11_9_1* *ls_a_dQ* - *Tex_Folding* - - -Type Boolean -Default Value 1 - -Setting this to zero completely disables Latex-Suite's folding functionality. -However, the TexFoldTextFunction() is still available in case you want to use -another folding scheme but still want to continue using the fold text function. - - -g:Tex_AutoFolding *ls_11_9_2* *ls_a_dR* - *Tex_AutoFolding* - - -Type Boolean -Default Value 1 - -This setting controls whether Latex-Suite automatically creates manual folds for -a file when it is opened. You can still use the \rf mapping to refresh/create -folds even when this variable is set to zero. - --------------------------------------------------------------------------------- -Package Handling Customization *ls_11_10* *ls_a_dS* - *customizing-packages* - -These settings affect the custom packages [|ls_a_bN|] functionality in -Latex-Suite - - - -g:Tex_TEXINPUTS *ls_11_10_1* *ls_a_dT* - *Tex_TEXINPUTS* - - -Type string -Default Value '' - -This setting describes the directories scanned by Latex-Suite while searching -for custom user packages as described in the custom packages [|ls_a_bN|] -section. Do not include the present directory in this setting. The present -directory is always scanned for custom packages. - -This string should be set in the syntax accepted by Vim's native 'path' setting. - -================================================================================ -Credits *ls_12* *ls_a_dU* - *latex-suite-credits* - - - -And finally, the credits: - - -Artur R. Czechowski maintains the BSD package of Latex-Suite. Lots of valuable - feedback. -Lubomir Host provided the diacritics and also helped in development. -Alexander Wagner valuable suggestions during development. -Luc Hermitte his variation of Stephen Riehm's bracketing system is used - in Latex-Suite. -Gergely Kontra the clever little JumpFunc() in imaps.vim is due to him. - The implementation of the templates also borrows from - mu-template.vim by him. -Dimitri Antoniou author of ltags and also provided the nice tip about - forward / reverse search on DVI documents. -Stephen Riehm the extremely helpful bracketing system is from him. -Alan Schmitt provided macros/folding elements. Continued feedback, - bug-reports/fixes. -Hari Krishna Dara for ExecMap(), the clever little function which makes - typing visual mode mappings so much easier and error-free. -Alan G Isac for the comprehensive BibT() function for entering bibtex - entries. -Gontran Baerts for libList.vim -Peter Heslin useful discussion and also a lot of bug fixes. the - %%fakesection in folding.vim. -Zhang Lin-bo lots of very useful additions to folding. The code for - customizing the folding scheme is due to him. - -A large number of functions in Latex-Suite come from various other people. Some -of those people might have been missed here. Each function should however have -the author's name/e-mail above it. Thats the more authoritative place to check -out who has done what. - - *latex-suite-maintainer* *ls_a_eC* -The current maintainer(s) of Latex-Suite is(are) - - -Srinath Avadhanula <srinath@fastmail.fm> - -Mikolaj Machowski <mikmach@wp.pl> - -Benji Fisher <benji@member.AMS.org> - -================================================================================ -URLs used in this file - -*ls_u_1* : http://vim-latex.sourceforge.net -*ls_u_2* : http://vim-latex.sourceforge.net/index.php?subject=download -*ls_u_3* : http://www.cygwin.com -*ls_u_4* : http://www.google.com/search?q=windows%20gnu%20grep - -================================================================================ -About this file - -This file was created automatically from its XML variant using db2vim. db2vim is -a python script which understands a very limited subset of the Docbook XML 4.2 -DTD and outputs a plain text file in vim help format. - -db2vim can be obtained via anonymous CVS from sourceforge.net. Use - -cvs -d:pserver:anonymous@cvs.vim-latex.sf.net:/cvsroot/vim-latex co db2vim - -Or you can visit the web-interface to sourceforge CVS at: -http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/vim-latex/db2vim/ - -The following modelines should nicely fold up this help manual. - -vim:ft=help:fdm=expr:nowrap -vim:foldexpr=getline(v\:lnum-1)=~'-\\{80}'?'>2'\:getline(v\:lnum-1)=~'=\\{80}'?'>1'\:getline(v\:lnum)=~'=\\{80}'?'0'\:getline(v\:lnum)=~'-\\{80}'?'1'\:'=' -vim:foldtext=substitute(v\:folddashes.substitute(getline(v\:foldstart),'\\s*\\*.*',"",""),'^--','\ \ \ \ \ \ ','') -================================================================================ |